Capative Portal take too long to connect

Capative Portal take too long to connect

Capative Portal take too long to connect
Capative Portal take too long to connect
a week ago - last edited a week ago
Tags: #Portal #controller
Model: OC200  
Hardware Version: V5
Firmware Version: 5.14.32.56

 

Captive portal take too long to login

Captive Portal, SSID > guest network ,no authentication, timeout>8 hours, Landing page >Promotional URL,Terms Service 

New install December 2024 

OC200 v 5.14.32.56

ER605 v2.2.6

TL SG2210Mp v4.20

EAP670 v2  1.1.0

 

I phone can not login, login again it works goes to url 

android take too, login again, wait , does not display the url page and gets connect to internet

 

I have Engenius right now with no issues   

 

Any tips would be appreciated .. Thanks 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Capative Portal take too long to connect-Solution
a week ago - last edited a week ago

Hi  @s8m 

 

For those portal SSIDs with guest network enabled, we need to configure an ACL to allow this SSID access the controller.

 

You may refer to the following post:


How to allow guest network to access specific device on the main network by configuring EAP ACL?

 

In your case, the destination IP is the controller's IP address.

Wish you a happy life and smooth network usage! 
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Capative Portal take too long to connect-Solution
a week ago - last edited a week ago

Hi  @s8m 

 

For those portal SSIDs with guest network enabled, we need to configure an ACL to allow this SSID access the controller.

 

You may refer to the following post:


How to allow guest network to access specific device on the main network by configuring EAP ACL?

 

In your case, the destination IP is the controller's IP address.

Wish you a happy life and smooth network usage! 
Recommended Solution
  0  
  0  
#2
Options