IGMP Snooping Omada Controller problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

IGMP Snooping Omada Controller problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
IGMP Snooping Omada Controller problem
IGMP Snooping Omada Controller problem
2025-01-30 16:56:20 - last edited 2025-02-06 08:04:16
Hardware Version:
Firmware Version:

Hi

I had a problem when setting up IGMP Snooping in OMADA controller.

Earlier I already tuned according to the instructions How to configure IGMP Snooping on Omada switches for hotel IPTV scenario
Everything was great.

Now a banal problem, in the results of application I see a message:
Command "ip igmp snooping drop-unknown"(line 1) failed to execute.

 

I cannot forbid an unknown multicast traffic on switches ip igmp snooping drop-unknown.

 

Tell me how to solve this issue?

 

Controller version 5.15.8.2 (Stable)

  0      
  0      
#1
Options
1 Accepted Solution
Re:IGMP Snooping Omada Controller problem-Solution
2025-02-06 07:58:45 - last edited 2025-02-06 08:04:16

  @Clive_A Everything turned out to be much easier.
To use the filtering of the multicast traffic, the MLD Snooping for IPV6 should also be turned on, although I do not use IPV6.

Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:IGMP Snooping Omada Controller problem
2025-02-05 01:59:53

Hi @NikolyaProdigy 

Thanks for posting in our business forum.

If this is the case, then the line is not supported in the controller mode.

  1  
  1  
#2
Options
Re:IGMP Snooping Omada Controller problem-Solution
2025-02-06 07:58:45 - last edited 2025-02-06 08:04:16

  @Clive_A Everything turned out to be much easier.
To use the filtering of the multicast traffic, the MLD Snooping for IPV6 should also be turned on, although I do not use IPV6.

Recommended Solution
  0  
  0  
#3
Options