Send over WAN2 and receive over WAN1, but not in Link-Backup Timespan
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Send over WAN2 and receive over WAN1, but not in Link-Backup Timespan
Region : Argentina
Model : TL-ER6120
Hardware Version : V1
Firmware Version :
ISP :
Hello guys,
i am using following WAN-Connections
WAN1
* Upload 300 kbps
* Download 1000 kbps
* Limits: no
WAN2
* Upload 40 Mbps
* Download 40 Mbps
* Limits: 30 GB (both directions)
* No Limits from 22:00 in the evening to 08:00 in the morning
At first i made a Link-Backup rule:
* WAN1 > WAN2 > Timing > 22:00-08:00 (every day)
Now my question:
In the other timespan (not 22:00-08:00) i´d like to send all Data over WAN2 and receive all Data over WAN1.
If this is not possible (because different ISP), i´d like to truncate the data as follows:
WAN1: HTTP
WAN2: FTP, Email
How can i do this?
Thank you for help
Roland
(Answers in German are welcome)
Model : TL-ER6120
Hardware Version : V1
Firmware Version :
ISP :
Hello guys,
i am using following WAN-Connections
WAN1
* Upload 300 kbps
* Download 1000 kbps
* Limits: no
WAN2
* Upload 40 Mbps
* Download 40 Mbps
* Limits: 30 GB (both directions)
* No Limits from 22:00 in the evening to 08:00 in the morning
At first i made a Link-Backup rule:
* WAN1 > WAN2 > Timing > 22:00-08:00 (every day)
Now my question:
In the other timespan (not 22:00-08:00) i´d like to send all Data over WAN2 and receive all Data over WAN1.
If this is not possible (because different ISP), i´d like to truncate the data as follows:
WAN1: HTTP
WAN2: FTP, Email
How can i do this?
Thank you for help
Roland
(Answers in German are welcome)
