Force wired device to specific VLAN?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I think I know the answer to this but wanted to check...
My setup is this:
- SG2016P way down in my utility room next to the ER605 router and the cable modem.
- Line running to my office where I have an unmanaged switch with my desktop, laptop, Nintendo and Arlo base station wired up.
I want to assign my Arlo base station and Nintendo Switch to my IOT VLAN and keep my computers on my Core VLAN.
I assume the only way to do this is to put a managed switch in my office and then designate at the port level which VLAN each plugged in device is assigned to? I can't simply identify the devices in the network map and configure them to a VLAN?
Hi @DrNeau
Thanks for posting in our business forum.
If their MAC addresses are static, you can consider MAC VLAN.
Based on the MAC address, they are assigned with different VLAN IDs.
User Guide reference:
Controller:
How to Configure MAC-Based Authentication on Omada SDN Controller with the Built-in RADIUS Server?
Hi @DrNeau
Thanks for posting in our business forum.
If their MAC addresses are static, you can consider MAC VLAN.
Based on the MAC address, they are assigned with different VLAN IDs.
User Guide reference:
Controller:
How to Configure MAC-Based Authentication on Omada SDN Controller with the Built-in RADIUS Server?