VLAN - Can I assign different vlan networks?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VLAN - Can I assign different vlan networks?
VLAN - Can I assign different vlan networks?
2014-02-01 07:03:35 - last edited 2021-08-21 03:45:18
Region : UnitedStates

Model : TL-R470T+

Hardware Version : V3

Firmware Version :

ISP :


I just purchased a TL-470T+

I want to connect 3 different routers to the LAN ports. Each of these routers are BELKINs and do not allow me to disable NAT.

These routers are on a different subnet each.

I would like to see if I can setup different PORT VLANs each belonging to one of the routers' subnets, and connecting the routers from LAN port to LAN port.

Any other suggestions are welcome.

Thanks
0
0
#1
Options
1 Reply
Re:VLAN - Can I assign different vlan networks?
2014-02-02 05:55:13 - last edited 2021-08-21 03:45:18

Yass wrote


I would like to see if I can setup different PORT VLANs each belonging to one of the routers' subnets, and connecting the routers from LAN port to LAN port.


Hi, Yass

You don't need the vlans on you network topology because WAN ports on TL-R470T+ are not on the same broadcast domain.

Also Port VLANs can not be configured on WLAN interfaces on TL-R470T+

See TP-Link TL-R470T+ User Guide (Page 51): Port VLAN
http://tplink-manuals.org/tplink-tl-r470t-user-guide/51/

You need to set WAN Ports count to 3 on "Network -> WAN -> WAN Mode" and configure WAN interfaces.

See TP-Link TL-R470T+ User Guide (Page 23): WAN Mode
http://tplink-manuals.org/tplink-tl-r470t-user-guide/23/
0
0
#2
Options