multiple ssid with TL-ER6020

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
multiple ssid with TL-ER6020
multiple ssid with TL-ER6020
2014-02-21 14:39:15 - last edited 2021-08-21 04:43:04
Region : Romania

Model : TL-ER6020

Hardware Version : V1

Firmware Version :

ISP :


Hello,

I have a TL-ER6020 and a multiple SSID wireless AP. TL-ER6020 supports only port-based VLAN. I would like to know if this is enough to setup a multiple SSID wireless network.
If yes, I want to know how should I connect the wireless AP to TL-ER6020. On which LAN port.

Thank you!
0
0
#1
Options
2 Reply
Re:multiple ssid with TL-ER6020
2014-08-01 17:14:02 - last edited 2021-08-21 04:43:04
Port VLAN is very simple, all it do is to block the communication between different port VLAN. So if you don't want the client from different AP to communicate with each other, just connect these two AP to two port that belong to different Port VLAN. If you use a single AP with multiple SSID, since it can only connected to one port, so there is not able to use port vlan to do the seperate work. generally, multi SSID based on 802.1Q Tag VLAN, it's another more complicated VLAN tech.
0
0
#2
Options
Re:multiple ssid with TL-ER6020
2015-03-02 05:00:22 - last edited 2021-08-21 04:43:04
istvank,

Your post is pretty old, but civic is correct.

Basically you need two Access Points to accomplish this. But your guest network on one VLAN and your secure (private) network on a different VLAN.

This is how we have configured it and it works great (and the APs are not that expensive).

Hope this helps.
0
0
#3
Options