Multiple WAN Addresses to multiple LAN addresses with limited ports
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Multiple WAN Addresses to multiple LAN addresses with limited ports
Region : UnitedStates
Model : TL-ER5120
Hardware Version : V2
Firmware Version : 1.0.8 Build 20140212 Rel.36037
ISP : Verizon
I'd like to configure my TL-ER5120 router to connect different WAN addresses, one-to-one, to different LAN addresses and with also limiting the ports. I have just one WAN port involved. The ISP has given me a block of 8 IP addresses.
For example --
Connect xxx.xxx.xxx.2 to 192.168.0.3 for ports 80 and 22.
Connect xxx.xxx.xxx.3 to 192.168.0.15 for port 80 only.
Connect xxx.xxx.xxx.4 to 192.168.0.5 for ports 80 and 1025.
I just cannot find the correct combinations of actions to make this happen.
Thank you.
Model : TL-ER5120
Hardware Version : V2
Firmware Version : 1.0.8 Build 20140212 Rel.36037
ISP : Verizon
I'd like to configure my TL-ER5120 router to connect different WAN addresses, one-to-one, to different LAN addresses and with also limiting the ports. I have just one WAN port involved. The ISP has given me a block of 8 IP addresses.
For example --
Connect xxx.xxx.xxx.2 to 192.168.0.3 for ports 80 and 22.
Connect xxx.xxx.xxx.3 to 192.168.0.15 for port 80 only.
Connect xxx.xxx.xxx.4 to 192.168.0.5 for ports 80 and 1025.
I just cannot find the correct combinations of actions to make this happen.
Thank you.