Site-to-site - TL-ER6120 to MS 2008 PPTP server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Site-to-site - TL-ER6120 to MS 2008 PPTP server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Site-to-site - TL-ER6120 to MS 2008 PPTP server
Site-to-site - TL-ER6120 to MS 2008 PPTP server
2015-01-09 04:55:28 - last edited 2021-08-21 04:35:02
Region : Argentina

Model : TL-ER6120

Hardware Version : V1

Firmware Version :

ISP :


There are a couple how-to guides, e.g. "How to setup site-to-site PPTP VPN on TP-LINK Router - Welcome to TP-LINK.pdf" on how to setup site-to-site vpns systems when using two TL-ER6120 VPN routers.

I'm trying to use one TL-ER6120 to make a site-to-site vpn connection with a standard windows 2008 remote access server running PPTP vpn server..

Normal WinPC, OSX, android clients can PPTP client connect to the PPTP server without problems.


Layout:

(1) PC (Lan 192.168.0.2) <---> access internal resources <---> TL-ER6120 (Lan 192.168.0.1) <---> FIOS Modem/router (Lan 192.168.1.1 & public IP x.x.79.x) <---> INTERNET <---> Win2008 PPTP server (public ip x.x.175.x --> client pool x.x.175.x to xx) <---> (2) access internal resources

I've followed those guides, and can connect the TL-ER6120, can establish an active / stable vpn connection between the TL-ER6120 and the Win2008 server.

However, I can not get traffic routed properly (1) <---> (2) to access resources in either direction.

I presume it is a routing table entry tat must be manually added as nothing else works

Oh, if the Wan is set to PPTP connect to the Win2008 server, traffic from (1) can see all of (2) I can not access resources on (1) from (2)

Any help?
  0      
  0      
#1
Options
3 Reply
Re:Site-to-site - TL-ER6120 to MS 2008 PPTP server
2015-01-10 12:02:45 - last edited 2021-08-21 04:35:02
- I guess the issue is how to force all traffic through the tunnel - it seems split tunneling is the default and I need to stop it - there are other posts to this effect but no solution has been provided -
  0  
  0  
#2
Options
Re:Site-to-site - TL-ER6120 to MS 2008 PPTP server
2015-01-15 10:56:52 - last edited 2021-08-21 04:35:02
Post screenshots of your configuration. Remove any password information as necessary.
  0  
  0  
#3
Options
Re:Site-to-site - TL-ER6120 to MS 2008 PPTP server
2015-01-26 08:50:06 - last edited 2021-08-21 04:35:02
Hello - TP-Link support is working on this (or they were) - I've sent them a MS white paper on Win2k3 site-to-site PPTP server setup - very much the same on Win2k8 - I'm looking for ER6120-to-MS RRAS 2k8 PPTP server lan-to-lan setup

- I've got this partially working with a ER6120-to-ER6120 setup but I'm still having problems with ssystem on the remote Lan seeing devices on the local Lan -

regards, chris o.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 766

Replies: 3