Problem with port foewarding and no-ip service
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Problem with port foewarding and no-ip service
Region : Others
Model : TL-R600VPN
Hardware Version : V2
Firmware Version :
ISP :
Hello,
I have a strange problem with a router. We have two ADSL lines and they're connected via TL-R480T+ but, as that router have a problems with firewall and port forwarding I decided to use TL-R600VPN for no-ip service.
The problem goes is that, although I forwarded ports, they're still closed. I can see via no-ip that a login is fine, the IP is correct but I can't make it opet ports. It's connected on one of the lines with a PPOE login and acc, same as TL-R480T+.
So, any suggestion is welcome.
P.S. problem with TL-R480T+ is that it sees traffic on ports as a flood and closes ports. Of course, that ports are open for a mysql DB insertion.
Model : TL-R600VPN
Hardware Version : V2
Firmware Version :
ISP :
Hello,
I have a strange problem with a router. We have two ADSL lines and they're connected via TL-R480T+ but, as that router have a problems with firewall and port forwarding I decided to use TL-R600VPN for no-ip service.
The problem goes is that, although I forwarded ports, they're still closed. I can see via no-ip that a login is fine, the IP is correct but I can't make it opet ports. It's connected on one of the lines with a PPOE login and acc, same as TL-R480T+.
So, any suggestion is welcome.
P.S. problem with TL-R480T+ is that it sees traffic on ports as a flood and closes ports. Of course, that ports are open for a mysql DB insertion.