VPN Client can't access computers on connected Lan-to-Lan VPN Via IPSEC

VPN Client can't access computers on connected Lan-to-Lan VPN Via IPSEC
VPN Client can't access computers on connected Lan-to-Lan VPN Via IPSEC
2015-04-09 06:14:47
Region : UnitedStates

Model : TL-ER604W

Hardware Version : V1

Firmware Version : 1.1.0 Build 20141031 Rel.32628s

ISP : TWC


I have 2 sites set up with IPSEC VPN: Site A IP is 192.168.10.X and Site B is 192.168.20.X - I have Site A router set up to accept VPN IPSEC remote Clients as well. I would like to be able to remotely connect to site A via VPN and also access Site B resources. I am currently using Shrew VPN client software. Any advice on how to accomplish this (if possible) would be greatly appreciated
0
0
#1
Options
3 Replies
Re:VPN Client can't access computers on connected Lan-to-Lan VPN Via IPSEC
2015-08-01 06:02:22
I am also interested to solve this problem.
Got 2 sites (192.168.1.0/25; 192.168.2.0/25) interconnected by IPsec VPN. In near future going to add 2 more sites.
One of the site's should accept remote VPN tunnels, L2TP/IPsec was configured as "Client to LAN", IP address pool was defined as a range of the site's LAN subnet - 192.168.1.100-192.168.1.127.
After connection it was possible to ping all the local clients of the site (192.168.1.0/24), but second site (192.168.2.0/25) was unreachable.
Adding addinational routes at Windows doesn't helped. Seems that router isolates remote L2TP clients from IPsec tunnel between sites.
0
0
#2
Options
Re:VPN Client can't access computers on connected Lan-to-Lan VPN Via IPSEC
2015-08-11 11:54:34
Read tutorial for hub-spoke configuration. Link
0
0
#3
Options
Read tutorial for hub-spoke configuration. Link
2015-08-14 06:40:29
W
here is this link to read.
0
0
#4
Options