TL-R600VPN to TL-R600VPN Site to Site IpSec VPN Tunnel Help
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-R600VPN to TL-R600VPN Site to Site IpSec VPN Tunnel Help
Region : UnitedStates
Model : TL-ER6120
Hardware Version : V1
Firmware Version : 1.2.3 Build 140801 Rel.49374n
ISP : Comcast and Verizon
Hello, I just purchased 2 TL-R600VPN Routers and configured them for IpSec. Both can access the internet. Router A is the main office and Router be is a remote, small office. I set them up per instructions found on the Forum and also from the manual. The settings mirror each other and I do not see anything wrong with the configuration.
Router A, at the main office, has ports open for exchange and Activesync. Email is working fine, my first question is do I need to open ports for the VPN to work. On both routers>? On Router A at the main office?
I cannot find a screenshot or anything that explains how to setup 2 TL-R600's for IpSec. They usually show one TL-R600 with another model. Can anyone point me to a screenshot for setting up 2 TL-R600's please.
I get the error couldn't find configuration on the main site.
[/TD]
[/TR]
[/TABLE]
Does anyone know why I cannot get a tunnel to connect I really have to get this working.. somehow.. I disabled, enabled, re-edited the settings, checked them 10 times.. everything looks good.. is it a port not opened? Firmware and hardware are latest version and both match. password is the same.. Settings are matched correctly.. any ideas anyone?
Thank You.
Model : TL-ER6120
Hardware Version : V1
Firmware Version : 1.2.3 Build 140801 Rel.49374n
ISP : Comcast and Verizon
Hello, I just purchased 2 TL-R600VPN Routers and configured them for IpSec. Both can access the internet. Router A is the main office and Router be is a remote, small office. I set them up per instructions found on the Forum and also from the manual. The settings mirror each other and I do not see anything wrong with the configuration.
Router A, at the main office, has ports open for exchange and Activesync. Email is working fine, my first question is do I need to open ports for the VPN to work. On both routers>? On Router A at the main office?
I cannot find a screenshot or anything that explains how to setup 2 TL-R600's for IpSec. They usually show one TL-R600 with another model. Can anyone point me to a screenshot for setting up 2 TL-R600's please.
I get the error couldn't find configuration on the main site.
| couldn't find configuration. |
| initiate new phase 1 negotiation: XX.XX=IP[500]<=>XX.=IP[500] |
| couldn't find configuration. |
| IPsec enabled [TABLE="align: center"] [TR] [TD]couldn't find configuration. |
| phase2 negotiation failed due to time up waiting for phase1. ESP XX.XXIP[0]->XX.XXIP[0] |
| ISAKMP-SA deleted XX.XX=IP[500]-XX=IP[500] spi:b017c06f1943ef05:0000000000000000 |
| couldn't find configuration. |
| isakmp_newcookie 2505 Get 16 bytes from urandom. |
| isakmp_newcookie 2499 Get no bytes from random,try /dev/urandom. |
| initiate new phase 1 negotiation: XX.XXIP[500]<=>XX.XXIP[500] |
| phase2 negotiation failed due to time up waiting for phase1. ESP XX.XX.XX.XX[0]->XX.XX.XX.XX[0] |
| ISAKMP-SA deleted XX.XX.XX.XX[500]-XX.XX.XX.XX3[500] spi:bf8f9623d87f34d5:0000000000000000 |
[/TD]
[/TR]
[/TABLE]
Does anyone know why I cannot get a tunnel to connect I really have to get this working.. somehow.. I disabled, enabled, re-edited the settings, checked them 10 times.. everything looks good.. is it a port not opened? Firmware and hardware are latest version and both match. password is the same.. Settings are matched correctly.. any ideas anyone?
Thank You.
