TL-R600VPN to TL-R600VPN Site to Site IpSec VPN Tunnel Help

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-R600VPN to TL-R600VPN Site to Site IpSec VPN Tunnel Help

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-R600VPN to TL-R600VPN Site to Site IpSec VPN Tunnel Help
TL-R600VPN to TL-R600VPN Site to Site IpSec VPN Tunnel Help
2015-06-03 04:56:51 - last edited 2021-08-21 05:00:58
Region : UnitedStates

Model : TL-ER6120

Hardware Version : V1

Firmware Version : 1.2.3 Build 140801 Rel.49374n

ISP : Comcast and Verizon


Hello, I just purchased 2 TL-R600VPN Routers and configured them for IpSec. Both can access the internet. Router A is the main office and Router be is a remote, small office. I set them up per instructions found on the Forum and also from the manual. The settings mirror each other and I do not see anything wrong with the configuration.

Router A, at the main office, has ports open for exchange and Activesync. Email is working fine, my first question is do I need to open ports for the VPN to work. On both routers>? On Router A at the main office?

I cannot find a screenshot or anything that explains how to setup 2 TL-R600's for IpSec. They usually show one TL-R600 with another model. Can anyone point me to a screenshot for setting up 2 TL-R600's please.

I get the error couldn't find configuration on the main site.


















couldn't find configuration.
initiate new phase 1 negotiation: XX.XX=IP[500]<=>XX.=IP[500]
couldn't find configuration.
IPsec enabled



[TABLE="align: center"]
[TR]
[TD]couldn't find configuration.
phase2 negotiation failed due to time up waiting for phase1. ESP XX.XXIP[0]->XX.XXIP[0]
ISAKMP-SA deleted XX.XX=IP[500]-XX=IP[500] spi:b017c06f1943ef05:0000000000000000
























couldn't find configuration.
isakmp_newcookie 2505 Get 16 bytes from urandom.
isakmp_newcookie 2499 Get no bytes from random,try /dev/urandom.
initiate new phase 1 negotiation: XX.XXIP[500]<=>XX.XXIP[500]
phase2 negotiation failed due to time up waiting for phase1. ESP XX.XX.XX.XX[0]->XX.XX.XX.XX[0]
ISAKMP-SA deleted XX.XX.XX.XX[500]-XX.XX.XX.XX3[500] spi:bf8f9623d87f34d5:0000000000000000



[/TD]
[/TR]
[/TABLE]


Does anyone know why I cannot get a tunnel to connect I really have to get this working.. somehow.. I disabled, enabled, re-edited the settings, checked them 10 times.. everything looks good.. is it a port not opened? Firmware and hardware are latest version and both match. password is the same.. Settings are matched correctly.. any ideas anyone?

Thank You.
  0      
  0      
#1
Options
4 Reply
Does Modem settings need to be tweaked when connecting 2 TL-R600 Site to Site
2015-06-03 06:57:59 - last edited 2021-08-21 05:00:58
Region : UnitedStates

Model : TL-ER6120

Hardware Version : V1

Firmware Version : 1.2.3 Build 140801 Rel.49374n

ISP : Comcast


I am trying to get VPN working on 2 TL-R600 routers. Does anything need to be done by the ISP in order to get these VPN to work? I get cannot find Configuration Errors.

OR are there anyports that need to be open for VPN to work? I have some ports open for Exchange email on the main site.. but I did not open any ports on the remote site's router.. Could that be why i cannot establish the vpn tunnel?

Any help is greatly appreciated.
  0  
  0  
#2
Options
Re:TL-R600VPN to TL-R600VPN Site to Site IpSec VPN Tunnel Help
2015-06-04 11:00:46 - last edited 2021-08-21 05:00:58
Provide the topology. What's the firmware version of your R600VPN?
  0  
  0  
#3
Options
Re:TL-R600VPN to TL-R600VPN Site to Site IpSec VPN Tunnel Help
2017-02-26 02:46:18 - last edited 2021-08-21 05:00:58
I ran into this same problem (fought for a day or 2, then bought a different brand). I don't believe you can connect these together as a tunnel - which is why the instructions only show connections to an actual IPSec VPN router - The TL-R600 is client-only, apparently.
Correct me if I'm wrong in this assessment.
  0  
  0  
#4
Options
Re:TL-R600VPN to TL-R600VPN Site to Site IpSec VPN Tunnel Help
2017-02-26 16:03:41 - last edited 2021-08-21 05:00:58

Beefydog wrote

I ran into this same problem (fought for a day or 2, then bought a different brand). I don't believe you can connect these together as a tunnel - which is why the instructions only show connections to an actual IPSec VPN router - The TL-R600 is client-only, apparently.
Correct me if I'm wrong in this assessment.

R600VPN can be used as a IPsec VPN server, there should be something wrong with the configuration or some restriction in ISP.
  0  
  0  
#5
Options