Region : Germany

Model : TL-ER5120

Hardware Version : Not Clear

Firmware Version : 1.0.8 Build 20140212 Rel.36037

ISP : T-DSL Business

Hi,

I configured a W900V Router behind WAN3 as internet gateway. Works really fine.

Now, I try to access the webinterface of this router and that doens´t work.

ER5120 has 10.0.0.2
WAN3 has 192.168.2.100
W900V has 192.168.2.1

I found this in the Routetable:


Route Table

No.

Destination

Gateway

Flags

Logical Interface

Physical Interface

Metric

1	0.0.0.0/0	x	GS	pppoe2	WAN2	0
2	0.0.0.0/0	192.168.2.1	GS	eth3	WAN3	0
3	0.0.0.0/0	192.168.0.1	GS	eth1	WAN1	0
4	10.0.0.0/24	N/A	C	eth0	LAN	0
5	192.168.0.0/24	N/A	C	eth1	WAN1	0
6	192.168.2.0/24	N/A	C	eth3	WAN3	0

And this (imho) tells me to route packages to 192.168.2.x to WAN3. So, I should reach it, but it doesn´t.

Have you any ideas?

Thanks a lot.