Business Community > Accessories > Compatibility between TL-POE4824G Omada POE Injector and TL-POE10R POE Splitter
< Accessories

Compatibility between TL-POE4824G Omada POE Injector and TL-POE10R POE Splitter

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Compatibility between TL-POE4824G Omada POE Injector and TL-POE10R POE Splitter

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Compatibility between TL-POE4824G Omada POE Injector and TL-POE10R POE Splitter
Compatibility between TL-POE4824G Omada POE Injector and TL-POE10R POE Splitter
2025-05-01 10:33:13 - last edited 2025-05-04 12:56:22
Tags: #PoE Adapter #TL-POE10R
Model: TL-POE10R  
Hardware Version:
Firmware Version:

Hi, I need to power a non POE enabled device in a location that does not have power,

 

The device is 5v @ 2A max so total 10w. I belive I can use a TPlInk TL-POE10R splitter set at 5v to match the device. These are rated at 12w so should be fine. Eventually it will be connected to my ER7212PC router POE port but temporarily I want to utilise a spare  TL-POE4824G which came with one of my EAP245.

Can anyone see any compatibility issues bwtween the TL-POE4824G and either the eventual ER7212P or the temporary POE4824G (the latter is rated at 24w)

 

Many thanks

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Compatibility between TL-POE4824G Omada POE Injector and TL-POE10R POE Splitter-Solution
2025-05-03 12:38:57 - last edited 2025-05-04 12:56:30

@Fozzie Bear, yes. The IEEE 802.3 (af, at or bt) specs are for active POE.

Recommended Solution
  0  
  0  
#4
Options
Re:Compatibility between TL-POE4824G Omada POE Injector and TL-POE10R POE Splitter-Solution
2025-05-04 10:16:15 - last edited 2025-05-04 12:56:22

  @D-C many thanks for confirmation. That's what I'll buy then

 

Recommended Solution
  0  
  0  
#5
Options
5 Reply
Re:Compatibility between TL-POE4824G Omada POE Injector and TL-POE10R POE Splitter
2025-05-02 15:58:02

Hi @Fozzie Bear,

 

I don't think the TL-POE4824G Injector will work with TL-POE10R splitter.  The POE4824G is "passive" and the POE10R is "active".  The ER7212P should use "active" poe and work with the TL-POE10R.

  0  
  0  
#2
Options
Re:Compatibility between TL-POE4824G Omada POE Injector and TL-POE10R POE Splitter
2025-05-03 10:55:45

  @D-C many thanks for the reply. I didn't realise the Poe injector for EAP devices were passive. Is the TL-PoE160S an active injector?

many thanks

  0  
  0  
#3
Options
Re:Compatibility between TL-POE4824G Omada POE Injector and TL-POE10R POE Splitter-Solution
2025-05-03 12:38:57 - last edited 2025-05-04 12:56:30

@Fozzie Bear, yes. The IEEE 802.3 (af, at or bt) specs are for active POE.

Recommended Solution
  0  
  0  
#4
Options
Re:Compatibility between TL-POE4824G Omada POE Injector and TL-POE10R POE Splitter-Solution
2025-05-04 10:16:15 - last edited 2025-05-04 12:56:22

  @D-C many thanks for confirmation. That's what I'll buy then

 

Recommended Solution
  0  
  0  
#5
Options
Re:Compatibility between TL-POE4824G Omada POE Injector and TL-POE10R POE Splitter
2025-05-06 01:07:36

Hi @Fozzie Bear 

Thanks for posting in our business forum.

This would come in handy: 

Common Questions About 802.3 PoE

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1906

Replies: 5

Tags

PoE Adapter
TL-POE10R
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.