Question regarding Audio Out interface

I was unable to find the type of connector I will need to listen to the live audio from the NVR using standard Headphones. I do not want to use the Two-Way Audio feature, and I could not verify the type of cable needed.
One particular type of cable I found is a 2 RCA Male connectors to 3.5 mm female cable, but I am unsure if that will work. Please check the screenshot:
The NVR user manual says the following:
Please help me with the technical name of the cable required for me to use a 3.5 mm jack headphone to listen to live audio from the NVR. Also, I could not find info on the "1 inch" RCA output. Thank you.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content

The interface you need for headphones without a microphone should be a RCA male connector, and you use your headphone's 3.5mm jack for it.
We do not have information on what's on the market. What you should use is as above and as you described.
- Copy Link
- Report Inappropriate Content

The interface you need for headphones without a microphone should be a RCA male connector, and you use your headphone's 3.5mm jack for it.
We do not have information on what's on the market. What you should use is as above and as you described.
- Copy Link
- Report Inappropriate Content
Thanks for the reply.
Most of the RCA connectors I found were two RCA connectors to one 3.5 mm ones. Would this type of connector work?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content

Information
Helpful: 0
Views: 108
Replies: 3
Voters 0
No one has voted for it yet.