1
Votes

ER7412-M2 missing features in v1.20

  This repeated request has been merged into the main thread Missing features ER7412-M2 v1.20 . Please vote on the main thread.

 
1
Votes

ER7412-M2 missing features in v1.20

  This repeated request has been merged into the main thread Missing features ER7412-M2 v1.20 . Please vote on the main thread.
ER7412-M2 missing features in v1.20
ER7412-M2 missing features in v1.20
2025-07-04 18:39:27 - last edited 2025-07-07 01:40:19
Model: ER7412-M2  
Hardware Version: V1
Firmware Version: 1.20

Hi,


when is the firmware update planned for the router to add the functionality introduced in version  ER605(UN)_V2.6_2.3.0 Build 20250428  for ER605?

For example, WireGuard peers currently support only IP addresses, while with dynamic IPs this setup will only work if DNS names are also supported, not just IPs.


Funds were spent to upgrade the network between offices, but it turned out that the newest ER7412-M2 v1.20 does not support features which already available in a simpler device. As a result, two ER7412-M2 worth ~€500 are now sitting unused as a bricks — it cannot be put into operation or used to restructure the network between our offices because both of them in DDNS.


Btw, is such functionality as firmware v2.3.0* for model ER605v2 has in roadmap or we can't count on it and better to return devices to its seller with refund and try to upgrade network in other way? Idea was just copy settings from ER605 to ER7412-M2 and to have more powerfull hardware and increased Wireguard speed.

Please reply, we have no big time slot for refund.


Thnak you in advance,

Al

#1
Options
2 Reply
Re:ER7412-M2 missing features in v1.20
2025-07-08 16:11:42
Hi, Just to clarify for myself, knows dev.team about these missing features for ER7412-M2? Is it in backlog somewhere on dev side? Btw, in Omada SDN controller during device template creation process for ER605 V2, we cannot use DNS name in Wireguard peer setup as well - IP address allowed only, but in standalone mode in ER605 V2 it works fine with DNS/IP. At the moment we 100% need this feature in standalone mode at least, just let us know if this fix is not expected for ER7412-M2.
#2
Options
Re:ER7412-M2 missing features in v1.20
2025-08-01 09:50:48

 As a temporary solution we did reconf. of our network from WireGuard VPN to IPSec VPN and it works fine between of these two hosts with ER7412-M2. 

#3
Options