@PavelDobias 

What is the network status for the local cameras? 

Do you wire them instead of using WIFI?

If you lower their quality, will this video play improve?

  @Clive_A  One camera is on wifi, the others on wire. This and the previous video was captured on camera with ethernet connection. When using sub-stream its the same thing.

  @PavelDobias 

PavelDobias wrote

  @Clive_A  One camera is on wifi, the others on wire. This and the previous video was captured on camera with ethernet connection. When using sub-stream its the same thing.

If you set the frequency to 50 or 60 Hz, any difference? 

  @Clive_A I cant change frequencies on those cameras. I can change the anti-flicker, but it won't make any difference.

  @PavelDobias 

PavelDobias wrote

  @Clive_A I cant change frequencies on those cameras. I can change the anti-flicker, but it won't make any difference.

Do you use ONVIF?

Do you experience this choppy issue when you use Reolink app or web?

Have you tried RTSP and added it via this protocol to the NVR?

Play RTSP in this format: rtsp://ip/live/ch/stream/avm

channel is the NVR channel.

stream 1 is the main, 2 is the sub.

If trying the RTSP to add the cameras and the issue persists, we need you to install the debug firmware and work with us to troubleshoot and locate the reason. 

  @Clive_A 

Hi, im sorry for the late reply.

The cameras are working flawlessly when using the reolink app, both on pc and phone.

Also right now i cant test the rtsp because the cameras are not working due to some cable issue, im gonna fix it tomorrow and report how its working.