port not tagging vlan
**The topic belong to wired but i'm using the port on the eap**
I have the EAP655 connected to my pc and I use the downlink port from the eap to my computer.
I have set the native vlan to 200 and allowed other tagged vlan.
pcap on the uplink port shows that the vlan is properly tagged:
but on the pcap from my computer connected to the eap, those vlan tags are no longer there:
is there any config i'm missing?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @m_rk
Tagged data will be transparently transmitted to the Ethernet port. Some NICs cannot capture tagged packets.
Verification method: Connect another EAP to this Ethernet port, then capture packets on the uplink port of that EAP. You will see the tagged packets.
- Copy Link
- Report Inappropriate Content
Hi @m_rk
Tagged data will be transparently transmitted to the Ethernet port. Some NICs cannot capture tagged packets.
Verification method: Connect another EAP to this Ethernet port, then capture packets on the uplink port of that EAP. You will see the tagged packets.
- Copy Link
- Report Inappropriate Content
@Vincent-TP Thanks for the update. I thought it was the eap that was dropping the tags
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 153
Replies: 3
Voters 0
No one has voted for it yet.