Omada controller notifications and system configuration

Omada controller notifications and system configuration

Omada controller notifications and system configuration
Omada controller notifications and system configuration
2025-07-29 19:09:18 - last edited 2025-07-30 07:08:59
Model: TL-SG3428XPP-M2  
Hardware Version:
Firmware Version:

Good day 

 

Im a novice at best and need advice 

 

I'm looking at changing my setup at home

Presently im using an Asus ROG GT-BE98 with dual wan with load balance enabled connected to a TP-LINK jetstream tl-sg3428xpp-m2 managed switch with a few Asus ai mesh routers connected 

 

The issue i have is the Asus router does not do notifications. 

 

I was thinking of getting TP-Link er605 to handle the dual wan and OC200 controller to allow notification both email and push to phone app. 

 

Can someone confirm if it is possible to get notification when either wan fails and load balance is load balance bonding.

 

Also can the setup be as follows 

Fibre A ONT

Fibre B ONT

Tp-link ER605 router, wan A and B with load balance 

Asus router GT-BE98 to manage all routing for now

TP-LINK jetstream tl-sg3428xpp-m2 24-port 

TP-LINK OC200 controller via poe

 

 

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Omada controller notifications and system configuration -Solution
2025-07-30 07:08:10 - last edited 2025-07-30 07:08:59

Hi  @Deeps530 

 

Yes, ER605 and OC200 will achieve your requirements.

Below is the page to configure the notification:

 

But, compared with ER605, I will recommend ER707-M2 insteads.

You are using tl-sg3428xpp-m2 2.5G switch, and the ER605 is limited to 1G. ER707-M2 also has 2.5G ports. 

 

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Omada controller notifications and system configuration -Solution
2025-07-30 07:08:10 - last edited 2025-07-30 07:08:59

Hi  @Deeps530 

 

Yes, ER605 and OC200 will achieve your requirements.

Below is the page to configure the notification:

 

But, compared with ER605, I will recommend ER707-M2 insteads.

You are using tl-sg3428xpp-m2 2.5G switch, and the ER605 is limited to 1G. ER707-M2 also has 2.5G ports. 

 

Recommended Solution
  0  
  0  
#2
Options
Re:Omada controller notifications and system configuration
2025-07-30 09:50:14

Thank you. 

Ive purchased the ER707 m2

Expected delivery is the 1st of August 

  0  
  0  
#3
Options