Internal LAN VPN Routing (Site-to-Site)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Internal LAN VPN Routing (Site-to-Site)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Internal LAN VPN Routing (Site-to-Site)
Internal LAN VPN Routing (Site-to-Site)
2015-10-27 07:24:27 - last edited 2021-08-21 05:01:13
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

I need some assistance routing my internal LAN within a site-to-site VPN with NAT routers. I was created a static route from the first network to the VPN side. 192.168.101.0 -> 192.168.200.0. that is working.

My main issues is form 192.168.98.0 -> 192.168.101.0 and from 192.168.99.0 -> 192.168.101.0

Is there a setting on routers (tl-r600vpn) that will allow the routeing of internal lan traffic.

I am including a network diagram and not dure what other information may be required. The red lines are routes that are currently working.
https://dl.dropboxusercontent.com/u/58850968/vpnnet.png

please let me know, Thank you for the assistance.
  0      
  0      
#1
Options
2 Reply
Re:Internal LAN VPN Routing (Site-to-Site)
2015-10-29 08:38:54 - last edited 2021-08-21 05:01:13
I think you may need to creat another two independent VPN line.
  0  
  0  
#2
Options
Re:Internal LAN VPN Routing (Site-to-Site)
2015-10-30 01:09:48 - last edited 2021-08-21 05:01:13
Is this within the current VPN router configuration?
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1038

Replies: 2

Related Articles