Early Access EAP773 | EAP783 v1.1.1 Pre-release Firmware (Update on 4th Nov, 2025)
This Article Applies to:
EAP783 V1, Fully Adapted to Omada SDN Controller v5.14 or above;
EAP773 V1, Fully Adapted to Omada SDN Controller v5.14 or above;
Release Notes:
New Feature/ Enhancement:
- Supported Portal Logout.
- Supported cluster deployment in Local Controller mode (Omada Central doesn’t support).
- Supported RADIUS Proxy(Global View> Server Settings> Radius Proxy Server).
- Supported OWE.
- Supported upgrading firmware through cloud in standalone mode.
- Supported Rate Limit with Portal Authentication.
- Supported disabling HTTP protocol in Standalone mode.
- Supported DHCP Option43.
- Supported multiple Radius servers when using MAC-Based Authentication (Site View Settings>MAC-Based Authentication).
- Added support for configuring NAS ID with WPA-Enterprise encryption.
- Supported DNS Queries (Network Tools>Network Check>DNSLookup).
- Supported DNS Adoption.
- Supported configuring the Device Name in Controller mode.
- Supported viewing status information and simple configuration through standalone management page when devices managed by the Controller.
- Supported displaying the maximum associated clients range in Controller mode(EAP Config>Advanced>Load Balance).
- Supported displaying the bandwidth of the EAP in Controller mode.
- Added Support for 11 a/n mixed mode for 5GHz radio in Controller mode.
- Supported multicast and broadcast data statistics.
- Supported disabling HTTP, HTTPS and APP discovery in Controller mode (Only with Pro controller).
- Supported Non-stick Roaming function.
- Supported authentication type of EKMS and Generic Radius with Unbound MAC for PPSK with Radius.
- Supports 1024 PPSK entries.
- Supported Multicast Filtering with IPv6 address.
- Supported Multicast/Broadcast Rate Limit
- Supported displaying Configuration Result.
- Optimized roaming function.
- Optimized Automatic Power Optimization function.
- Optimized the configuration of Beacon Interval.
- Optimized Portal Function.
- Optimized MLO connection stability.
- Improved Device and Network security.
- Improved time to configure SSID.
- Improved stability.
Bug Fixed：
- Fixed the issue that RSSI display error in WLAN Optimization.
- Fixed the issue that URL Filtering cannot work properly after TLS1.3 is enabled in the browser.
- Fixed the issue that HTTPS Redirection and Pre-Authentication Access don’t take effect when use portal.
- Fixed the issue that IPv4 multicast packets can’t be transmitted from mesh AP to root AP.
- Fixed the issue that one hop mesh AP’s client on SSID with VLAN would have slow Network speed.
- Fixed the issue that CoA doesn’t take effect with some MLO clients.
Pre-release Firmware Download
Attention
Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
EAP783_V1_1.1.1_20251103 (Pre-release)
EAP773_V1_1.1.1_20250818 (Pre-release)
EAP783_V1_1.1.1_20250818 (Pre-release)
Notes:
(1) The above firmware is applied to EAP783 V1.
(2) Your device’s configuration won’t be lost after upgrading.
(3) The above firmware is fully adapted to Omada SDN Controller v5.14 and above
Update Log
4th Nov, 2025
Provide the pre-release link for EAP783
EAP783_V1_1.1.1_20251103 (Pre-release)
31th Oct, 2025
Remove the download links.
19th Aug, 2025
Provide the following pre-release link:
EAP773_V1_1.1.1_20250818 (Pre-release)
EAP783_V1_1.1.1_20250818 (Pre-release)
19th Aug, 2025
Update the release note.
Feedback
Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.
To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.
When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:
- Management mode (Controller or Standalone)
- Device Model(s) and Hardware
- Device Firmware (previous and current)
Thank you in advance for your great cooperation and support.
Recommended Threads
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada EAP Related Issues [Constantly Updated]
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
went from:
EAP783v1_1.1.1_[20251103-rel40478]_up_signed.bin
to:
| EAP783v1_1.1.2_[20250923-rel51879]_up_signed.bin
|
to:
1.1.4 Build 20251030 Rel. 57645
per upgrade log in controller
- Copy Link
- Report Inappropriate Content
Looks like if you trigger it from the mobile app, it works. It doesn't work if you're trying from the controller web interface.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@the901
Same, won't let me update from: 1.1.1 Build 20251103 Rel. 40478(4555)
- Copy Link
- Report Inappropriate Content
1.1.2 Build 20250923 Is an older build and doesn't meet the requirements (1.1.2 Build 20251030) to upgrade to 1.1.4.
- Copy Link
- Report Inappropriate Content
Thanks for the information, none of my searches to the firmware downloads show that file.
One thing that does not fill me with confidence. The folder is named "EAP783 1.0_1.1.3 Build 20250923", however, the actual firmware name is "EAP772v1_1.1.3_[20250923-rel38362]_up_signed.bin"
- Copy Link
- Report Inappropriate Content
FYI all, the 1.1.2 firmware is available now (botom of this page) https://support.omadanetworks.com/my/download/firmware/eap783/
Then you can use the Firmware tab in the controller to get to 1.1.4.
Updated a few hours ago. So far so good. Will see how it goes. Interested to see if anyone finds issues.
- Copy Link
- Report Inappropriate Content
@Vincent-TP
1 more month and we have been 2 years without a stable firmware release. Never have I seen something like this, we spent 4500€ on your "professional" equipment. Not sure if that trust can ever be rebuilt, and one of the big reasons I normally only buy hardware where there are community open source firmware as options available.
Your homepage still lists "EAP783(US)_V1_1.0.14 Build 20240801" as the latest firmware.
- Copy Link
- Report Inappropriate Content
@the901 ah, I haven't been able to see the release notes.
But that is interesting that there will need to be a step update.
- Copy Link
- Report Inappropriate Content
From the release notes:
1.1.4 Build 20251030 Rel. 57645
Version Info: 1. Minimum FW Version for Update: 1.1.2 Build 20251030 Rel. 58575.
This is getting silly.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 12652
Replies: 104
Voters 0
No one has voted for it yet.