TL-R470T+ static route

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-R470T+ static route

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-R470T+ static route
TL-R470T+ static route
2015-11-12 02:45:52 - last edited 2021-08-21 06:00:09
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hello all,


I have a problem with the router TL-R470T+ regarding static routes.


My network configuration is as follows:


TL-R470T+ WANs are connected to 3 ADSL for load balancing.
The LAN IP is 192.168.1.1/24. I have several devices in this lan 192.168.1.0/24 and all of them have correct connection to the Internet.
Other router (router B) is connected to this LAN using WAN side IP 192.168.1.200, and LAN is connected to the network 10.10.0.0/24 using normal routing (no NAT is performed). Gateway for router B is 192.168.1.1.


In order to configure this route I added the following static route in the TL-R470T+:


Destination: 10.10.0.0
Subnet: 255.255.255.0
Next Hop: 192.168.1.200
Interface: LAN (i also tried WAN1, WAN2, WAN3 and all together)


The problem is that devices 10.10.0.0/24 can't access the Internet.


Is something wrong with this configuration?


Thank you
  0      
  0      
#1
Options
3 Reply
Re:TL-R470T+ static route
2015-11-12 10:55:06 - last edited 2021-08-21 06:00:09
Have you checked the setting of the other router?
  0  
  0  
#2
Options
Re:TL-R470T+ static route
2015-11-12 16:26:43 - last edited 2021-08-21 06:00:09

tomm wrote

Have you checked the setting of the other router?


The TL-R470T+ is for replacement of an old router. The old router worked for years with this setup.
So I think the roter B settings are correct.
  0  
  0  
#3
Options
Re:TL-R470T+ static route
2016-04-23 10:08:49 - last edited 2021-08-21 06:00:09
Sorry for this old topic and maybe I'm wrong, but if all you want the machines in the 10.10.0.0/24 network access the Internet, you might try set the PPPoE option in Router A, then set the router B to connect to it?
  0  
  0  
#4
Options