Hi  @GRL 

Thanks for the feedback. 

Is this only related to channel-changing logs?

Do the other logs for the EAP650 display the device name normally?

If you don't mind, please download the EAP650 and see if this only happens to the pre-release version. Thanks.

  @Vincent-TP 

i dont know, i havent seen my EAPs produce any other logs.  I do have a lot of logging options disabled though, any particular one to enable to take a look ?

Hi  @GRL 

I recommend enabling wireless client online/offline, this is the easiest to produce. 

(Logs > Notifications > Events > Client) 

  @Vincent-TP 

Seems to display the EAP name just fine on other log types.  I connected and disconnect a PC onto a couple different SSIDs to check

Hi  @GRL 

Thank you so much for the info.

Would you mind testing with the stable firmware again?

in the meantime, I will feedback to our team to test this locally. 

GRL wrote

  @Vincent-TP 

 

Seems to display the EAP name just fine on other log types.  I connected and disconnect a PC onto a couple different SSIDs to check

  @Vincent-TP 

I have put the stable 1.1.13 firmware on the EAP that usually gets radar interference, but in all likelyhood i dont think ill be able to give you any meaningful feedback as it happens about once every 6 weeks or so

  The EAP on 1.1.13 stable had DFS radar detection channel change again last night, it still just shows up as its MAC in the logs and not the device name

Hi  @GRL 

Just saw this message. Thanks for the update!

GRL wrote

  The EAP on 1.1.13 stable had DFS radar detection channel change again last night, it still just shows up as its MAC in the logs and not the device name