Business Community > Video Recorders > VIGI NVR resets date and time and shows setup wizard after reboot
< Video Recorders

VIGI NVR resets date and time and shows setup wizard after reboot

VIGI NVR resets date and time and shows setup wizard after reboot

VIGI NVR resets date and time and shows setup wizard after reboot
VIGI NVR resets date and time and shows setup wizard after reboot
3 weeks ago - last edited Monday
Model: VIGI NVR1008H  
Hardware Version: V2
Firmware Version: 1.4.0Build 250710Rel.71260n

Greetings!

 

I have an NVR setup using 6 of 8 channels and set to loop recording 24/7. As our network is scheduled to reboot every sunday at 3AM, I have also set this as the cameras' and nvr's reboot schedule as well.

 

I have noticed that after rebooting, the NVR always shows the setup wizard with the date and time being reset.

 

Is there any way to bypass this and retain prior settings?

 

As far as I noticed, only the date and time is reset.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:VIGI NVR resets date and time and shows setup wizard after reboot-Solution
3 weeks ago - last edited Monday

  @Observer01 

Check the power supply if you use the original power adapter.

Make sure you have set a proper NTP server.

Is your firmware the latest one? Did you make any firmware changes recently? Did this happen after or before the firmware update? 

 

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:VIGI NVR resets date and time and shows setup wizard after reboot-Solution
3 weeks ago - last edited Monday

  @Observer01 

Check the power supply if you use the original power adapter.

Make sure you have set a proper NTP server.

Is your firmware the latest one? Did you make any firmware changes recently? Did this happen after or before the firmware update? 

 

Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 606

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.