0
Votes

add PoE readings for PoE switches to the SNMP

 
0
Votes

add PoE readings for PoE switches to the SNMP

add PoE readings for PoE switches to the SNMP
add PoE readings for PoE switches to the SNMP
a week ago
Tags: #SNMP
Model: SG2008P  
Hardware Version: V3
Firmware Version: 3.20.14

hi all,

 

currently just walking thru SNMP OIDs of gateway APs and switches to setup Zabbix SNMP monitoring for those.Found out, that SG2008P (and neither SG2008 nor SG2218) has no private OIDs. 

 

Could you please add PoE related info to some the SNMP OID? currently only info about ports (speed, status and counters) is available via SNMP.

 

Even in Controller (Windows, v6.1.0.19) the current power drawn by device is visible only in pop-up window while hovering over the port icon in Port view....

 

 

/BR ZoloNN ----------------------------------------------------------------------------------- Omada 2x ER605(UN) v2.0 + SG2008P(UN) V3.20 + SG2218 V1.20 + 2x SG2008 V4.20 + 3x EAP615-Wall(EU) V1.0
#1
Options
2 Reply
Re:add PoE readings for PoE switches to the SNMP
a week ago

Hi  @ZoloNN 

Thanks for posting in our business forum.

Actually we have private OID which you can download with this link. If includes the information about PoE of the SG2008P.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
#2
Options
Re:add PoE readings for PoE switches to the SNMP
a week ago

Hi @Hank21,

thanks for answer - just realized, that SNMP browser that I've used (FrameFlow SNMP browser) isn't able to browse thru and display all OIDs.

I'll need to look for another software.... any suggestions for Windows?

 

/BR ZoloNN ----------------------------------------------------------------------------------- Omada 2x ER605(UN) v2.0 + SG2008P(UN) V3.20 + SG2218 V1.20 + 2x SG2008 V4.20 + 3x EAP615-Wall(EU) V1.0
#3
Options