How to factory reset EAP660 HD
How do I factory reset this device? There are two sets of flashing lights when you hold down the reset button. The first set is rapid short flashes after about 5 seconds and the second set is after 10 seconds and they're slow long flashes. I have tried releasing the reset button after both set of flashes and I'm the middle of both sets of flashes. The problem is that the factory ssids will become available but when I try to connect to one it disconnected and goes back to the original SSID with password. The devices are also not accepting SSH connections.
Hi @Slayvus
Thanks for posting here.
To avoid the situation MRS mentioned, you can manage the device without Internet access, which will prevent it from being automatically adopted by the old controller.
Detailed steps, please refer to situation 2 in the following guide:
How do I login to the web management page of the EAP Series products (Standalone mode)?
Hi @Slayvus
Thanks for posting here.
To avoid the situation MRS mentioned, you can manage the device without Internet access, which will prevent it from being automatically adopted by the old controller.
Detailed steps, please refer to situation 2 in the following guide:
How do I login to the web management page of the EAP Series products (Standalone mode)?