ER605 V2 - 2023-01-30 Firmware update speed under 90Mbps Beofre 800 to 900MBPs
old version getting 700 to 900 Mbps , after updateing speed going 90Mbps, after rollback firmware , speed getting 700 to 900Mbps
new version getting problem
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @RajaKSA
Thanks for posting here.
Every firmware version undergoes rigorous testing before release, so the likelihood of such an issue occurring is virtually zero.
Most likely, the 90Mbps speed is due to the connection negotiating to 100Mbps.
The possible reasons could be: 1. The port speed configuration is set to 100 Mbps;
2. There is an issue with the network cable—please try replacing the network cable.
3. Try switching the router’s port and the front-end modem’s port.
- Copy Link
- Report Inappropriate Content
Hi @RajaKSA
Thanks for posting in our business forum.
May I ask is your current firmware version 2.3.2? If so, what was the previous firmware before update?
Could you provide the network topology as well as the speed test screenshots respectively?
- Copy Link
- Report Inappropriate Content
Hi @RajaKSA
Thanks for posting here.
Every firmware version undergoes rigorous testing before release, so the likelihood of such an issue occurring is virtually zero.
Most likely, the 90Mbps speed is due to the connection negotiating to 100Mbps.
The possible reasons could be: 1. The port speed configuration is set to 100 Mbps;
2. There is an issue with the network cable—please try replacing the network cable.
3. Try switching the router’s port and the front-end modem’s port.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 282
Replies: 2
Voters 0
No one has voted for it yet.