RADIUS Authentification successfull but Clients gets no Ping
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RADIUS Authentification successfull but Clients gets no Ping
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
We want to use some EAP120 Access Points in a School with 1100 Students and try to roll out this Access Point. But, we have troubles with a RADIUS / AP / WLAN NIC combination.
Our configuration:
-) RADIUS-Server (NAP) on a Windows Server 2008 R2 machine in LAN A (static IP range)
--) Policies and Certificate configured
-) WLAN-AP's and Controller are in LAN B (static IP range)
--) 1 SSID with externly RADIUS config
-) Windows 7 Clients, Android, iOS, ... connecto to LAN C (DHCP range)
--) newest NIC driver installed
All is running fine, but with one WLAN NIC Type we run into problems. Linksys WMP600N. If I try to connect to WLAN with a client using this WMP6000N, the clients connects without any erros (without any error in the RADIUS log too) and gets an IP from DHCP, but, if I ping something I get no response (exclude loopback and own ip). If I connect the client to a WPA2-PSK based SSID on the same AP, I have no problems to ping something. The same client with another NIC like TP-LINK WN881ND have no probs with 802.1x. I'll repeat, no errors to see in the radius log. We also tried to change back to our old WLAN-APs they run same configuration (RADIUS) and tested the combination twice, but, no problems with the old APs.
My conclude is, the client cannot transfer his packets through the AP to the network. The packets seems to be dropped directly on the AP because I get not ping respone from the AP on the client-side. So, it have to be something with the Firmware or any other compatibility.
Strange.. What can I do? Please help!
Hardware Version : Not Clear
Firmware Version :
ISP :
We want to use some EAP120 Access Points in a School with 1100 Students and try to roll out this Access Point. But, we have troubles with a RADIUS / AP / WLAN NIC combination.
Our configuration:
-) RADIUS-Server (NAP) on a Windows Server 2008 R2 machine in LAN A (static IP range)
--) Policies and Certificate configured
-) WLAN-AP's and Controller are in LAN B (static IP range)
--) 1 SSID with externly RADIUS config
-) Windows 7 Clients, Android, iOS, ... connecto to LAN C (DHCP range)
--) newest NIC driver installed
All is running fine, but with one WLAN NIC Type we run into problems. Linksys WMP600N. If I try to connect to WLAN with a client using this WMP6000N, the clients connects without any erros (without any error in the RADIUS log too) and gets an IP from DHCP, but, if I ping something I get no response (exclude loopback and own ip). If I connect the client to a WPA2-PSK based SSID on the same AP, I have no problems to ping something. The same client with another NIC like TP-LINK WN881ND have no probs with 802.1x. I'll repeat, no errors to see in the radius log. We also tried to change back to our old WLAN-APs they run same configuration (RADIUS) and tested the combination twice, but, no problems with the old APs.
My conclude is, the client cannot transfer his packets through the AP to the network. The packets seems to be dropped directly on the AP because I get not ping respone from the AP on the client-side. So, it have to be something with the Firmware or any other compatibility.
Strange.. What can I do? Please help!