Business Community > Controllers > Can not delete port profile
< Controllers

Can not delete port profile

Can not delete port profile

Can not delete port profile
Can not delete port profile
Thursday - last edited 14 hours ago
Model: Omada Software Controller (Linux)  
Hardware Version:
Firmware Version: 6.1.0.19

Team,

 

I'm sanitizing the port-profiles and removing the obsolete versions after upgrading to 6.1.0.19.

This is because the vlans are removed from the port-profiles.

 

However, there is one port-profile that can not be deleted.

It keeps coming back with the error "The LAN profile referenced by the Switch Port cannot be deleted.".
What exactly does this mean?

 

See attached screenshots:

One shows the current port-profiles. The one that says "! - delete this pp" is the one that should be deleted.

If a search for ports with this profile there are none (the other screenshot).

 

What could be blocking for deleting this profile?

 

 

With warm regards - Will

 

 

 

*** making it run like clockwork ***
  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Can not delete port profile-Solution
Yesterday - last edited 14 hours ago

  @ITV 

 

This can happen if that profile was used on ports, and then those ports were converted into a LAG - even if the LAG is using a different profile.  LAG ports are "virtual" and their config sits "on top" of whatever was there originally, it doesnt delete or change those records for some reason

 

Recommended Solution
  0  
  0  
#3
Options
Re:Can not delete port profile-Solution
14 hours ago - last edited 14 hours ago

  @GRL - this was indeed the case.

 

I removed the lacp config - which revealed the "real" port profile.

Once all related ports changed to a new port profile I could delete this one.

 

Thanks for the hint - great!

 

 

*** making it run like clockwork ***
Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:Can not delete port profile
Yesterday - last edited Yesterday

See also the initial/previous post:

Its not a big issue - but still... angel

 

Anyone? 

 

*** making it run like clockwork ***
  0  
  0  
#2
Options
Re:Can not delete port profile-Solution
Yesterday - last edited 14 hours ago

  @ITV 

 

This can happen if that profile was used on ports, and then those ports were converted into a LAG - even if the LAG is using a different profile.  LAG ports are "virtual" and their config sits "on top" of whatever was there originally, it doesnt delete or change those records for some reason

 

Recommended Solution
  0  
  0  
#3
Options
Re:Can not delete port profile-Solution
14 hours ago - last edited 14 hours ago

  @GRL - this was indeed the case.

 

I removed the lacp config - which revealed the "real" port profile.

Once all related ports changed to a new port profile I could delete this one.

 

Thanks for the hint - great!

 

 

*** making it run like clockwork ***
Recommended Solution
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 76

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.