SD Card not detected after reboot (and FTP upload non-existent)
SD Card not detected after reboot (and FTP upload non-existent)
so i bought this (nonsense) device which is claiming to have FTP support just to find out that all you can get through FTP is a very low res screenshot, not even full HD.
i bough the SD card thinking it would record to the card then upload but no, it does not do it either.
even worse is that after a reboot it just says the SD card is not present while 1 minute ago it was recording to the SD card. i would understand some file system corruption and have at least the option to format it but it is inserted and the firmware does not detect it? in a slot under 2 screwes? come on!
there seems to be no other support than this forum so i give it a long shot here. otherwise will be returning the item and writing honest review on amazon with detailed pictures
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @theruck,
I'm facing a similar issue with my VIGI C540-4G. The camera detects the microSD card, but formatting consistently fails at around 92%.
I'm using a SanDisk Ultra 128GB card and have already tested it on my Mac, where it appears to be working normally. My camera is running firmware version 2.2.1 Build 251218 Rel.70829n.
Did you find any solution or workaround for this issue before returning the camera? If so, could you please share what fixed it?
Thanks in advance.
- Copy Link
- Report Inappropriate Content
Hi, @Sunil_S_H
Thank you for posting here. It appears that the issue you are encountering is different from the issue raised by the original poster. To help us properly troubleshoot for you, please provide the following information:
1.Have you tested other SD cards on your camera to check if they can be formatted normally?
2.Have you tested whether your current SD card can be formatted successfully on another camera?
3.Was your camera working properly before this issue occurred? Did this problem arise after you upgraded the camera's firmware?
- Copy Link
- Report Inappropriate Content
the only solution is to return the camera because this firmware is incredibly bad. just buy something that works and never look back. this product is a useless dead end as it fails to do basic operations like card formatting or auto file cleanup. it is not card vendor dependent and everybody in the world knows it, yet you get stupid requests to try other cards other vendors just to get the feeling that your problem is being taken care of. it is not. buy a reolink camera
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 986
Replies: 13
Voters 0
No one has voted for it yet.