Business Community > Gateways > Need help to get right Firmware
< Gateways

Need help to get right Firmware

Need help to get right Firmware

Need help to get right Firmware
Need help to get right Firmware
2 weeks ago - last edited a week ago
Tags: #Firmware Update
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.0.0 build 2022106 Rel.56391

Need help kinda confused: 

 

so i have the TP Link ER605 V2.0 that shows in my screen shoot below. 

But when i check under where the serial number is i get the following: 

 

Model: ER605(UN) Ver. 2.6

 

i am not sure what version of firmware do download as there is version 2 and 2.60. also wehn i go to the firmware download and choose my model ER605 V2, can i click on the download and get the latest version or since i have not done it and its on build 2.0.0 or do i need to do a step upgrade?

 

Like get Ver 2.1 => to Ver 2.2 => to Ver 2.3?

 

or even more do i need to do the in-between version? 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Need help to get right Firmware-Solution
2 weeks ago - last edited a week ago

Hi  @Stitch177 

Basically TP-LINK products has the samne firmware with V.0 and V.6, so you can use the firmware under ER605 V2 or ER605 V2.6.

Since your current firmware is 2.0.0, so it is recommended that you can upgrade to 2.2.3 and then 2.3.1 and then to the latest version 2.3.3

You can check this update guide as well: How to Manually Upgrade Omada Gateway Firmware

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:Need help to get right Firmware-Solution
2 weeks ago - last edited a week ago

Hi  @Stitch177 

Basically TP-LINK products has the samne firmware with V.0 and V.6, so you can use the firmware under ER605 V2 or ER605 V2.6.

Since your current firmware is 2.0.0, so it is recommended that you can upgrade to 2.2.3 and then 2.3.1 and then to the latest version 2.3.3

You can check this update guide as well: How to Manually Upgrade Omada Gateway Firmware

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options
Re:Need help to get right Firmware
a week ago
Thank you
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 138

Replies: 2

Tags

Firmware Update
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.