connect tl-mr3420 to broadband router TL-R480T+ (not WiFi) as backup connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

connect tl-mr3420 to broadband router TL-R480T+ (not WiFi) as backup connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
connect tl-mr3420 to broadband router TL-R480T+ (not WiFi) as backup connection
connect tl-mr3420 to broadband router TL-R480T+ (not WiFi) as backup connection
2016-07-28 23:02:21 - last edited 2021-08-21 06:08:06
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hello!

I have a broadband router TP-Link TL-R480T+ and a TL-MR3420 (V 2.4) with 3G dongle and would like to combine the two, i.e. using the TL-MR3420 over 3G as a backup internet connection. No WiFi needed, just the 3G functionality.





I have found some information on the net, but all related to bridging WiFi, which I do not use. I would like to provide the 3G signal as a second WAN entry to the TL-R480T+ and, if the first connection falls, it would use the latter.

Here my TL-MR3420 Setup:
Network -> Internet Access
3G/4G Only

Network -> LAN
IP Address: 192.168.188.200
Subnetmask: 255.255.255.0

Wireless -> Wireless Settings
Disabled

DHCP -> DHCP Settings
Disabled

The rest of the settings are as factory default.

TL-R480T+ Setup:





TL-R480T+ tries to connect but never succeed.

I could set up the 3G router for working with a notebook, without having another line attached, so the 3G connection is working. If I try to connect it to the broadband router, it will not connect.

Any ideas or documentation about such a setup around?

Thanks for your appreciated help!
File:
TP-Link-3ISP-Setup.jpgDownload
  0      
  0      
#1
Options
4 Reply
Re:connect tl-mr3420 to broadband router TL-R480T+ (not WiFi) as backup connection
2016-08-19 20:35:12 - last edited 2021-08-21 06:08:06
I still have the same problem and, honestly, asking myself if there is really no solution to this. Any ideas are much appreciated!
  0  
  0  
#2
Options
Re:connect tl-mr3420 to broadband router TL-R480T+ (not WiFi) as backup connection
2016-09-06 05:31:08 - last edited 2021-08-21 06:08:06
I have an MR3420 for backup, but I let the 3420 make the failover decision. In my case the local devices connect to the 3420, the WAN port of the 3420 connects to a LAN port on my broadband router. The 3420 is setup for WAN primary w/3G backup. I had to get beta firmware last winter so the 3420 would failover correctly, but that happens without fail now. The 3420 in general has bugs, but those may be in the WIFI section that you don't use. I have Comcast WAN and T-Mobile backup.
  0  
  0  
#3
Options
Re:connect tl-mr3420 to broadband router TL-R480T+ (not WiFi) as backup connection
2016-09-20 23:52:47 - last edited 2021-08-21 06:08:06
Hello bsa1969 and forum!

Thanks for your explanation.

I brought the broadband router because the 3420 has a nasty problem, which I couldn't get rid off. He is doing the fail over just right, but does *not*, under any circumstances, get back to the cable when this signal is up again. I did try everything, including firmware updates, it does not work.

So, I bought the R480T+ and I am, so far, satisfied with it. It does switch nicely forth and back, depending on the availability of the lines.

I am living near the Amazonas in Brasil and we really have connection problems. Not only that I do have to contract two cable providers, I actually need a third GSM fail back solution, seems exaggerated, I know, but here the clocks work different.

I am ready to buy another GSM router for successful implementation, so please give me your 2 cents which one would suite in this constellation.
  0  
  0  
#4
Options
Re:connect tl-mr3420 to broadband router TL-R480T+ (not WiFi) as backup connection
2018-01-04 13:47:53 - last edited 2021-08-21 06:08:06
Hi There,

I Manage to configure the router TL-MR3420 together with TL-R470T+, what i did was:

1) Set static IP on TL-MR3420 then connect your network cable from wan1 to wan2 TL-R470T+
2) on TL-R470T+ make sure on wan2 configure set as static then wan2 should able to uplink
3) go to advanced -> load balance -> tick enable application optimized routing, tick also enable bandwidth based balance routing and select bandwidth balance routing ports: tick wan1 and tick wan 2 then click save.

you should experience speed fast. please reply if this works for you.
  0  
  0  
#5
Options