Can't Establish L2TP Connection from Mac OS El Capitan

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Can't Establish L2TP Connection from Mac OS El Capitan

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't Establish L2TP Connection from Mac OS El Capitan
Can't Establish L2TP Connection from Mac OS El Capitan
2016-09-21 05:10:20 - last edited 2021-08-21 06:48:34
Model :

Hardware Version :

Firmware Version :

ISP :

Hello,

Router: TL-ER6020
Firmware Version: 1.1.0 Build 20150416 Rel.35252
Hardware Version: TL-ER6020 v1.0

I have configured in the router settings a L2TP VPN Server Connection (Client-Lan), however when I try to connect from a computer running Mac OS X El Capitan I can't connect. The error message I get is that the L2TP Server didn't respond.

If I create and configure a PPTP Server connection (Client-Lan) instead I'm able to connect without problems. Its with L2TP That I'm having issues with.

Any ideas??

Thanks in advance.

CES
  0      
  0      
#1
Options
12 Reply
Re:Can't Establish L2TP Connection from Mac OS El Capitan
2016-09-21 13:52:50 - last edited 2021-08-21 06:48:34
http://www.tp-link.com/en/faq-444.html
Here is a FAQ about how to set L2TP VPN, you can double check your configuartion.
  0  
  0  
#2
Options
Re:Can't Establish L2TP Connection from Mac OS El Capitan
2016-09-21 23:09:15 - last edited 2021-08-21 06:48:34
Hello thanks for the link.

I followed the steps very closely, but when I try to connect I get the following error.

"the L2TP connection attempt failed because the security layer could not negotiate compatible parameters with the remote computer"

Any ideas??

Thanks

CES
  0  
  0  
#3
Options
TL-604W - cannot establish L2TP from MAC Sierra
2016-10-01 16:25:31 - last edited 2021-08-21 06:48:34
The same problem here...
  0  
  0  
#4
Options
Perhaps this is the issue it is having with MacOS, OS X, and iOS; L2TP over IPsec used to work.
2016-10-08 02:49:56 - last edited 2021-08-21 06:48:34
These releases add support for Diffie-Hellman (DH) Group 14 and 5 to L2TP over IPSec, and Diffie-Hellman Group 14 to Cisco IPSec. The new supported key exchange proposals are:
DH Group 14 14 14 14 5 5 5
Encryption algorithm AES256 AES256 AES256 AES256 AES256 AES256 AES256
Hash algorithm SHA256 SHA1 MD5 SHA512 SHA256 SHA1 MD5
Previous versions of iOS, OS X and Server supported DH Group 2 (only) for L2TP over IPSec. Previous versions of iOS also supported DH group 5 and 2 for Cisco IPSec, with DH group 2 for aggressive mode.
DH Group 2 is still supported but it has the lowest priority when finding a proposal match. Both L2TP over IPSec and Cisco IPsec now support DH Groups 14, 5, 2, in that order of preference. For aggressive mode, the VPN client will try first with DH Group 14; if it fails, it will try again with DH Group 2. Apple recommends using Group 14 or Group 5 since they provide stronger security than Group 2, which may be vulnerable to compromise.


Firmware Version: 1.1.0 Build 20150416 Rel.35252
Hardware Version: TL-ER6020 v1.0
  0  
  0  
#5
Options
Re:Can't Establish L2TP Connection from Mac OS El Capitan
2016-10-11 02:53:04 - last edited 2021-08-21 06:48:34
Hi , I have found a beta firmware for thisrouter,it is s solution for the L2TP VPN at Apple .

http://static.tp-link.com/resources/software/TL-ER6020v1_en_1.1.1_20160628-rel58934_up.zip

You may need to reconfigure the router after the firmware upgrade.
  0  
  0  
#6
Options
Re:Can't Establish L2TP Connection from Mac OS El Capitan
2016-10-11 20:53:44 - last edited 2021-08-21 06:48:34
Hello marcelotq

Thanks for providing the link for the beta firmware for the TL-ER6020v1. I'm having the same issue with router TL-ER604W V1.0 was wondering if you can please provide a beta firmware for this model as well.

Thanks.

Carlos Sosa
  0  
  0  
#7
Options
Re:Can't Establish L2TP Connection from Mac OS El Capitan
2016-10-11 21:03:32 - last edited 2021-08-21 06:48:34

cacososa wrote

Hello marcelotq

Thanks for providing the link for the beta firmware for the TL-ER6020v1. I'm having the same issue with router TL-ER604W V1.0 was wondering if you can please provide a beta firmware for this model as well.

Thanks.

Carlos Sosa


Hi, you can found here:
http://tp-link-support.de/firmware/

Or, direct access:
http://tp-link-support.de/firmware/TL-ER604W/TL-ER604Wv1_160622.beta.Apple-L2TP.zip
  0  
  0  
#8
Options
Re:Can't Establish L2TP Connection from Mac OS El Capitan
2016-10-12 21:32:03 - last edited 2021-08-21 06:48:34
Hello,

Thanks for the link. I was able to download the firmware just fine, however when I try updating the router, I get "UPDATE FAILED" Message. Is there a specific set of instructions I need to be following in order to update the firmware?

Any help would be greatly appreciate it.

Regards
Carlos Sosa
  0  
  0  
#9
Options
Re:Can't Establish L2TP Connection from Mac OS El Capitan
2016-10-13 04:52:59 - last edited 2021-08-21 06:48:34
Has the firmware you are trying to install officially been released by TP-Link yet?
It's not easily found unless you have that specific link..
  0  
  0  
#10
Options
Re:Can't Establish L2TP Connection from Mac OS El Capitan
2016-10-13 22:41:36 - last edited 2021-08-21 06:48:34
Well, the reason that it is not easily found is because it is a BETA firmware therefore it has not been officially released.
  0  
  0  
#11
Options