TL-ER6120 / TL-ER6020 Forwarding Same TCP/UDP Port to Different Servers

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-ER6120 / TL-ER6020 Forwarding Same TCP/UDP Port to Different Servers

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER6120 / TL-ER6020 Forwarding Same TCP/UDP Port to Different Servers
TL-ER6120 / TL-ER6020 Forwarding Same TCP/UDP Port to Different Servers
2016-09-30 06:44:14 - last edited 2021-08-21 06:59:12
Model :

Hardware Version :

Firmware Version :

ISP :

Hi All,

TL-ER6120 / TL-ER6020 Forwarding Same TCP/UDP Port to Different Servers

We have 14 active WAN IP addresses (32 total) and 43 active LAN IP addresses (8 physical, 35 Virtual servers, ~150 max needed). Need to forward the same TCP/UDP ports based on the destination WAN IP address to specific LAN IP addresses. Some WAN IP's send different TCP/UDP ports to many different servers, some WAN IP's map to one LAN IP, plus some of the ports need to be "translated" to other ports.

So depending on which WAN IP address (for example) port 80 is destined for determines which LAN IP address it sends it to. Currently port 80 is used on 11 different WAN IP's and only 2 WAN IP's point to the same LAN IP.

Oh, don't care which WAN connection it comes in on since it always needs to get to the correct server.

Can this be done with these routers and if so, can you please point me to the docs?

TIA,
WIN286
  0      
  0      
#1
Options
1 Reply
Re:TL-ER6120 / TL-ER6020 Forwarding Same TCP/UDP Port to Different Servers
2016-11-29 15:22:19 - last edited 2021-08-21 06:59:12
hey dude, I think you can try the ONe to One NAT and the policy routing, you can get the FAQs on their official websites
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 628

Replies: 1

Related Articles