EAP245 PoE 802.3af or 802.3at

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP245 PoE 802.3af or 802.3at

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP245 PoE 802.3af or 802.3at
EAP245 PoE 802.3af or 802.3at
2017-01-17 17:02:46
Model :

Hardware Version :

Firmware Version :

ISP :

Hi

On the German features Page of the EAP245 it supports the 802.3af
http://www.tp-link.de/products/details/cat-5692_EAP245.html#features

On the German specifications and the english page the 802.3at is listed.

With the power of 12,7W the EAP245 will fit the range of 802.3af.
Can some one from TP Link please confirm that the EAP245 will work on 802.3af to?

br JAjun
  0      
  0      
#1
Options
3 Reply
Re:EAP245 PoE 802.3af or 802.3at
2017-01-25 03:57:01

JAjun wrote


With the power of 12,7W the EAP245 will fit the range of 802.3af.


No, it won't. 802.3af assumes that due to line loss only 12,95 W out of 15,4 W is available for the powered device. Since there should be a reserve capacity, the specs of needing 802.3at are most likely correct. In practice this means that an EAP245 could probably also work with a 802.3af-compliant power source on short cable distances, but if the EAP is under heavy load the PoE source could be insufficient to keep the EAP running, thus leading to sporadic power outages.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:EAP245 PoE 802.3af or 802.3at
2018-02-04 03:01:17
FYI: Set up an EAP245 today, works fine with TL-POE150S (fairly standard home use, so no heavy load).
  0  
  0  
#3
Options
Re:EAP245 PoE 802.3af or 802.3at
2018-02-24 17:48:53
Hi,

EAP245 need IEEE 802.1 at PoE which power consumption is higher than 15w. If you use af PoE power, it may cause insufficent issue of EAP245.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 863

Replies: 3

Related Articles