EAP 220 Speeds
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP 220 Speeds
Model : EAP 220
Hardware Version :
Firmware Version : 2.02 Build 20160401 Rel 65964
ISP :
Hi All
I have a 1GB fibre circuit and have connected the 2 new AP 220's connected directly to a 4 port TPLINK GB POE Switch. The issue i have is speed or lack of on both 2.4 and 5Ghz Channels.
2.4GHz
5GHz
Both seem to very inconsistent from the Theoretical speeds.
2.4 GHz
Channel Width : 20/40Mhz
Channel: 6
Tx Power : 20
5Ghz
Channel Width : 20/40Mhz
Channel: 48
Tx Power : 17
Any ideas what for ideal settings to achieve the near to the quoted 2.4 Ghz and 5Ghz by TP-Link for the EAP 220 ?
Thank you
Hardware Version :
Firmware Version : 2.02 Build 20160401 Rel 65964
ISP :
Hi All
I have a 1GB fibre circuit and have connected the 2 new AP 220's connected directly to a 4 port TPLINK GB POE Switch. The issue i have is speed or lack of on both 2.4 and 5Ghz Channels.
2.4GHz
5GHz
Both seem to very inconsistent from the Theoretical speeds.
2.4 GHz
Channel Width : 20/40Mhz
Channel: 6
Tx Power : 20
5Ghz
Channel Width : 20/40Mhz
Channel: 48
Tx Power : 17
Any ideas what for ideal settings to achieve the near to the quoted 2.4 Ghz and 5Ghz by TP-Link for the EAP 220 ?
Thank you