EAP 115 internal WEB server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP 115 internal WEB server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP 115 internal WEB server
EAP 115 internal WEB server
2017-03-06 03:54:16
Model :

Hardware Version :

Firmware Version :

ISP :

After connecting EAP 115 to the softwear EAP controller, internal web server does not work

Permission denied: EAP Control Software is running. WEB Server is forbidden.

How can I repair internal web server????
  0      
  0      
#1
Options
4 Reply
Re:EAP 115 internal WEB server
2017-03-06 15:27:16
Hi, it is correct. When eap controller is running and eap is in connected state the web GUI is not available. To get web interface you need to close eap controller and wait for a couple of minutes to get back the web GUI.
  0  
  0  
#2
Options
Re:EAP 115 internal WEB server
2017-03-06 18:22:17

Efexs wrote

To get web interface you need to close eap controller


You need to forget the EAP managed by the controller in order to re-activate its web UI. Closing the controller will not dis-associate the EAP from it.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#3
Options
Re:EAP 115 internal WEB server
2017-03-06 22:00:21
After closing EAP controller internal web server works, but now I can not add AP to EAP controller again. The software does not see AP.
Does not help reinstalling software and resetting AP.
  0  
  0  
#4
Options
Re:EAP 115 internal WEB server
2017-03-07 17:30:16

chip_21 wrote

After closing EAP controller internal web server works, but now I can not add AP to EAP controller again. The software does not see AP.
Does not help reinstalling software and resetting AP.


No idea. Forgetting an EAP, then closing or restarting the EAC and later adopting the same EAP a second or a third time works for me even without restoring the EAP's firmware.

Maybe Windows or the EAC causes troubles. Probably it could help to just re-install the EAC to get rid of its former internal states.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#5
Options