Help to get maximal bandwidth, and connection to all clients
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Help to get maximal bandwidth, and connection to all clients
Model :
Hardware Version :
Firmware Version :
ISP :
Hi all,
I am trying to get maximum performance out of my setup in my workspace. We have 16 computers, a few printers, and a filesharingserver.
I have a TL-ER6020 LoadBalance router and a TL-SG3216 Managed switch.
I have 2 WAN connections: 1 DSL and 1 4G connection.
Sometimes the connection is very slow.
I think the Loadbalance isn't setup correctly.
Here is my configuration:
Switch
- IP is static 192.168.0.2
TL-ER6020 Loadbalance router
- Nat mode: NAT
- Wan 1: Dynamic IP, Upstream (30000), Downstream (86000)
- Wan 2: Dynamic IP, Upstream (4000), Downstream (20000)
- All boxes are checked under Advanced -> Load balance
Is everything setup as good as possible ?
Hardware Version :
Firmware Version :
ISP :
Hi all,
I am trying to get maximum performance out of my setup in my workspace. We have 16 computers, a few printers, and a filesharingserver.
I have a TL-ER6020 LoadBalance router and a TL-SG3216 Managed switch.
I have 2 WAN connections: 1 DSL and 1 4G connection.
Sometimes the connection is very slow.
I think the Loadbalance isn't setup correctly.
Here is my configuration:
Switch
- IP is static 192.168.0.2
TL-ER6020 Loadbalance router
- Nat mode: NAT
- Wan 1: Dynamic IP, Upstream (30000), Downstream (86000)
- Wan 2: Dynamic IP, Upstream (4000), Downstream (20000)
- All boxes are checked under Advanced -> Load balance
Is everything setup as good as possible ?