Business Community > Pharos Wireless Bridges > CPE 210 (V1) Wifi Repeater works fine, after about 48 hours no wifi network available anymore
< Pharos Wireless Bridges

CPE 210 (V1) Wifi Repeater works fine, after about 48 hours no wifi network available anymore

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

CPE 210 (V1) Wifi Repeater works fine, after about 48 hours no wifi network available anymore

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE 210 (V1) Wifi Repeater works fine, after about 48 hours no wifi network available anymore
CPE 210 (V1) Wifi Repeater works fine, after about 48 hours no wifi network available anymore
2017-05-12 03:55:28
Model :

Hardware Version :

Firmware Version :

ISP :

Hello together,

at first the details:

Model : CPE210

Hardware Version : V1

Firmware Version : 1.3.3 xy, now updated to TP_PharOS_2.0.0_170301

Powered with PoE-Power-Adapter with shielded cable RJ45.

As mentioned in the title, after starting the device everything works fine. The CPE210 in repeater mode connects to the configured wifi. Everything works fine for about 48 hours. Suddenly only the power led is on, no more wifi network activity. Rebooting the CPE210 via browser or by unplugg/plugg the PoE-Cable let the device work again for another approx. 48 hours.

Does anyone has any suggestion?

Many thanks in advance
  0      
 
  0      
 
#1
Options
12 Reply
Re:CPE 210 (V1) Wifi Repeater works fine, after about 48 hours no wifi network available anymore
2017-05-12 17:07:30
What's your detailed topology? Actually, repeater is not recommended mode for CPE as I know.
Since CPE concentrates wireless signal in a direction, which means the signal in backward is not very strong. So actually it can not bridge signal much further...

Anyway, for your issue, would reboot schedule function on pharos control be a workaround for you?
  0  
  0  
#2
Options
Re:CPE 210 (V1) Wifi Repeater works fine, after about 48 hours no wifi network available anymore
2017-05-13 14:30:43
Hello ZaiZai,
thanks for your reply.
The Topology just contains a router with wifi and the CPE210 for wifi range extension.
I did not used pharos control yet. The CPE210 is not connected to LAN via cable.
Is the reboot schedule function a configuration option for the CPE210 itself or do i have to establish a permanent connection between pharos control and the CPE device?
  0  
  0  
#3
Options
Re:CPE 210 (V1) Wifi Repeater works fine, after about 48 hours no wifi network available anymore
2017-05-13 19:42:04
This isn't about topology
Repeater mode works like that ever
Buy a timer and reboot every 24 hrs
Or go the hard way, leave a Laptop 24/7
And use Pharos Control and set auto reboot
Or go to the limit, flash Lede install the interface,
Use Cron 0 3 * * * reboot that will reboot everyday at 3 am
  0  
  0  
#4
Options
Re:CPE 210 (V1) Wifi Repeater works fine, after about 48 hours no wifi network available anymore
2017-05-13 20:57:37
Are we really suggesting that repeater / bridge mode on these CPEs works as such (i.e. expires every 48hrs)!?
Now serving finite customer via f(x)=AirTime/∞ on the 5Ghz band :-/
  0  
  0  
#5
Options
Re:CPE 210 (V1) Wifi Repeater works fine, after about 48 hours no wifi network available anymore
2017-05-14 16:28:14
i have tplink cpe 210 repeaters and what i know is that if you do a restart on the repeater you should also do restart on the main router.Also make sure your repeater settings are in order i.e disable dhcp settings,wds
  0  
  0  
#6
Options
Re:CPE 210 (V1) Wifi Repeater works fine, after about 48 hours no wifi network available anymore
2017-05-14 18:38:10

RTouris wrote

Are we really suggesting that repeater / bridge mode on these CPEs works as such (i.e. expires every 48hrs)!?


Not at all. Repeater mode is just another combination of client/AP mode, which is a mixed STA/Master mode of the WiFi adapter, pretty much like in bridge and AP client router modes. It's not supposed to "expire" after some time.

But repeater mode often is the cause for problems of any kind, most notably the hidden node problem and degradation of the link's overall throughput, the latter by nature of this technique.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#7
Options
Re:CPE 210 (V1) Wifi Repeater works fine, after about 48 hours no wifi network available anymore
2017-05-14 21:16:08

RTouris wrote

Are we really suggesting that repeater / bridge mode on these CPEs works as such (i.e. expires every 48hrs)!?

Buy one, use Repeater mode
If you have no issues after 48 hrs.
Bill me
Same device, or even a cheap router like 740, flash it with any third party firmware, DD-WRT, OPENWRT, Gargoyle or Lede, and will work on Repeater mode 24/7
The Point, Tp-Link hardware has no issues
It's the software.
  0  
  0  
#8
Options
Re:CPE 210 (V1) Wifi Repeater works fine, after about 48 hours no wifi network available anymore
2017-05-15 20:02:13
It's a pitty, that this is still a software problem because the device is sold to be able to be used as repeater.
Maybe a later software version will solve this problem.

Many thanks, using a timer to reboot would be a useful solution.
  0  
  0  
#9
Options
Re:CPE 210 (V1) Wifi Repeater works fine, after about 48 hours no wifi network available anymore
2017-05-15 20:32:51

volker71042 wrote

It's a pitty, that this is still a software problem because the device is sold to be able to be used as repeater.
Maybe a later software version will solve this problem.

Many thanks, using a timer to reboot would be a useful solution.


I did set up a CPE yesterday in repeater mode, routing complete traffic from my office over it. So far, there are no problems after 27 hours.

Lets see wether this can be re-produced on other CPEs. Tomorrow we will know.

Just a question: do you use DHCP on the repeater or did you set up a static IP? We had many problems with repeater mode on OpenWRT devices when DHCP was used. Since PharOS uses the same software base (Linux) as OpenWRT does, changes are that this could be the cause of problems with disconnects.

And no, a reboot is not considered a bug fix in the Linux ecosphere. :)
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#10
Options
Re:CPE 210 (V1) Wifi Repeater works fine, after about 48 hours no wifi network available anymore
2017-05-16 01:25:10
As a half-baked remedy you could try setting up a ping watchdog rule on the repeater-CPE to ping the AP's IP and reboot when it fails to get 2-3 replies after 5 mins each (given that it probably doesn't get one due to whatever reason makes it act up on the first place).

FWIW I've recently setup a CPE510 in bridge mode but after 3 days uptime have yet to experience these specific ill-effects.
Now serving finite customer via f(x)=AirTime/∞ on the 5Ghz band :-/
  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 4464

Replies: 12

Related Articles
CPE 210/510 how to discover
814 0
 Cpe 210
510 0
 Cpe 210
1115 0
 cpe 210
1015 0
 Cpe 210 or cpe 510?
484 0
 cpe 210 wifi antenna range
2241 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.