LED on/off and EAP Controller Software

LED on/off and EAP Controller Software
LED on/off and EAP Controller Software
2017-05-18 18:55:01
Model :

Hardware Version :

Firmware Version :

ISP :

Hello Guys,

2 Points.

If i configure the Setting LED on/off to OFF while my EAP isn't adopted to my Controller the LED goes off like it should.
If i then adopt the EAP the LED goes on again and theres no way to Access the EAP directly because of wrong username / password (everytime after adopting)
and no way to set LED OFF with Controller Software.

Second Point, the terms of Use field is much to short.
0
0
#1
Options
3 Replies
Re:LED on/off and EAP Controller Software
2017-05-20 17:14:28
You can either adopt an EAP and use the EAP Controller (EAC) to control EAP settings exclusively or you can use the EAP in standalone mode, but then you can't use EAC. Therefore local settings such as LED on/off are overwritten after adoption of an EAP in EAC and you won't be able to use the built-in web UI anymore. This is how it is supposed to work.

See the manual for details.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
0
#2
Options
Re:LED on/off and EAP Controller Software
2017-05-22 01:14:49
Thats what i thought, But why i cant switch The led Light off by using The Controller Software?
0
0
#3
Options
Re:LED on/off and EAP Controller Software
2017-05-22 21:53:00
Menu System -> LED in EAP-Controller. You can turn the LED on/off for the whole site, not for a single device.

Did you RTFM meanwhile? The Controller has an own manual: http://static.tp-link.com/EAP_Controller_V2.4.7_UG_1479808254522w.pdf
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
0
#4
Options