Business Community > WiFi > EAP245 5Ghz Wifi channels
< WiFi

EAP245 5Ghz Wifi channels

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP245 5Ghz Wifi channels

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP245 5Ghz Wifi channels
EAP245 5Ghz Wifi channels
2017-06-14 17:29:50
Model :

Hardware Version :

Firmware Version :

ISP :

Hi all,

last week i bought 2x EAP245 AP's for indoor usage at home.
So far they perform great. Range and ease-of-use is good combined with multiple ssid over vlans.

I read the specs in advance but couldn't find anything regarding the channels and region settings for wifi.
Are the 5Ghz channels limited (for the EU version) to just the 36-40-44-48 channels or will the higher channels (or DFS) be available with a software update later on??

Anyone knows??

Thx!!
  0      
 
  0      
 
#1
Options
3 Reply
Re:EAP245 5Ghz Wifi channels
2017-06-19 19:29:40

recombinator wrote


Anyone knows??


Only TP-Link could give an authoritative answer to this question. In the EU, 5GHz RLAN1 subband 2 (channels 52, 56, 60 and 64) and RLAN2 (channels 100 to 140) would require DFS/TCP even for indoor use, but currently the EAP's firmware does not support DFS/TCP so far. Anyway, CE requirements do indeed allow RLAN1 subband 2 or RLAN2 for indoor use here in Europe.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#3
Options
Re:EAP245 5Ghz Wifi channels
2017-06-20 21:07:14
Yeah, so i opened a support ticket last week and TP-Link replied that indeed the higher channels are not supported in the current firmware. They say that in the past there was an option to choose the "US" region which opened up the higher channels but they claim that it is not allowed within the Netherlands/EU region.
Frankly i'm a bit disappointed that even the subband 2 channels are not accessible. So back to Meraki for the time being :-(
  0  
  0  
#4
Options
Re:EAP245 5Ghz Wifi channels
2017-06-20 23:11:20
If have no idea which channels the TP-Link support had in mind, which should not be allowed in the Netherlands, but RLAN1 subband 2 and RLAN2 are indeed allowed for indoor use in the EU. The restriction is that only RLAN2 is allowed for outdoor. But in both cases (indoor/outdoor) the device must support DFS/TPC.

See https://en.wikipedia.org/wiki/List_of_WLAN_channels#5.C2.A0GHz_.28802.11a.2Fh.2Fj.2Fn.2Fac.29.5B18.5D
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1981

Replies: 3

Related Articles
EAP245 resets the 5GHz WIFI Channel after reboot (or at random)
595 0
EAP245 v3 :: 5GHz channels
2023 0
EAP245 5GHz Channel Selection - Channels past 48 are not avaliable in EU
3171 0
EAP245(US) v3.0: Can I enable DFS channels?
2688 1
EAP245 not allowing all channels and when set to auto all devices using the same 5g channel
1347 0
EAP245 v3 and firmware EAP245(US)_V3_5.0.6 Build 20220429
586 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.