Business Community > WiFi > EAP 120 and EAP 220 high cpu utilization
< WiFi

EAP 120 and EAP 220 high cpu utilization

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP 120 and EAP 220 high cpu utilization

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP 120 and EAP 220 high cpu utilization
EAP 120 and EAP 220 high cpu utilization
2017-07-12 03:52:56
Model :

Hardware Version :

Firmware Version :

ISP :

Good evening,

i have 3 EAP, 2 220 and 1 120

All 3 Access Points are on 100% CPU load, i can't send a reboot command from the Controller, ends with a timeout.
Even toggle power does not work, WLAN is not usable

Controller Software shows alerts:




All AP have worked for weeks now, reboot schedule is active, daily at 11pm

Any suggestions?

Cheers
Till
  0      
 
  0      
 
#1
Options
5 Reply
Re:EAP 120 and EAP 220 high cpu utilization
2017-07-12 04:49:12
Ok, i figured it out.
The server running the controller went crazy, some network services running 100% on one cpu, that seemed to be the cause. Restarted the service and now all AP are back to normal.
  0  
  0  
#2
Options
Re:EAP 120 and EAP 220 high cpu utilization
2017-07-13 08:50:02

Odin4242 wrote

Ok, i figured it out.
The server running the controller went crazy, some network services running 100% on one cpu, that seemed to be the cause. Restarted the service and now all AP are back to normal.


I am curious that if your problem solved now? I am wondering why the CPU utilization on the Controller host will affect the AP's CPU utilization.
  0  
  0  
#3
Options
Re:EAP 120 and EAP 220 high cpu utilization
2017-07-13 14:12:01

tomm wrote

I am curious that if your problem solved now? I am wondering why the CPU utilization on the Controller host will affect the AP's CPU utilization.


I installed the squid proxy on the server that runs the controller software. I can only guess, but i think some tcp port communication got mixed up. I uninstalled the squid, killed the windows service that was 100% and everything is back to normal now.
  0  
  0  
#4
Options
Re:EAP 120 and EAP 220 high cpu utilization
2017-08-17 13:19:36
A quick note on my 100% cpu problem with my EAPs:

I am running a Windows Home Server 2011 amongst other things for DNS, DHCP and the EAP Controller software. From time to time, one or more of the AP were unaccessable due to the problem described above.

The "NetworkingHelperSvc" on the server was causing that problem, sending UDP packets in the network (i think to discover devices) and the EAPs seem to get a bit overexcited :)
I deactivated the service as i am sure i don't need help finding the server and my clients in the LAN.

Cheers
Odin4242
  0  
  0  
#5
Options
Re:EAP 120 and EAP 220 high cpu utilization
2017-08-20 00:46:11
I somewhere did read that MS recommends to disable NetworkingHelperSvc as soon as one has found all servers and clients, which have been lost in the home LAN. :D
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1691

Replies: 5

Related Articles
 EAP 220 Speeds
695 0
 EAP 220 Cluster
1223 0
 EAP 220 Cluster
879 0
 EAP 120 - Cluster function
519 0
Gateway CPU/Memory Utilization
780 0
 EAP 220 Ethernet Problem
999 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.