Tunel IPSEC with 2 TL-ER6120

Tunel IPSEC with 2 TL-ER6120
Tunel IPSEC with 2 TL-ER6120
2017-07-28 14:39:21
Model :

Hardware Version :

Firmware Version :

ISP :

I try to connect two TP-Link TL-ER6120 through an IPSEC tunnel. I followed the steps in the manual, but the tunnel does not rise.

I have seen in the forum an article on creating a tunnel between a TL-ER6120 and a TL-R600VPN.
I followed the steps and I can not get the tunnel to connect.

Can somebody help me?
0
0
#1
Options
3 Replies
Re:Tunel IPSEC with 2 TL-ER6120
2017-08-24 18:04:14
Is there any other NAT device before the ER6120? If so, you have to do other setting on them.
If not, you can put the setting screenshots here, I can try to help you find the problem.
0
0
#2
Options
Re:Tunel IPSEC with 2 TL-ER6120
2017-08-25 13:23:00
Behind each tp-link I have an operator router.
0
0
#3
Options
Re:Tunel IPSEC with 2 TL-ER6120
2017-08-25 17:57:22

rcolomina wrote

Behind each tp-link I have an operator router.

Just need to make sure the parameter for each side are opposite. You can post the configuration screenshot here. I can try help.
0
0
#4
Options