TL-R480T+ WAN port not working as 100MBPS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-R480T+ WAN port not working as 100MBPS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-R480T+ WAN port not working as 100MBPS
TL-R480T+ WAN port not working as 100MBPS
2017-08-22 19:02:00 - last edited 2021-08-21 06:08:31
Model :

Hardware Version :

Firmware Version :

ISP :

Hi,

I have an internet plan with 20 MBPS bandwidth. When I connect my TL-R480T+ it shows WAN port is with 10MB.
If I set Negotiation Mode to 100MBPS FD, my internet doesn't work.

How can I overcome this issue?
File:
Speed Test.jpgDownload
  0      
  0      
#1
Options
9 Reply
Re:TL-R480T+ WAN port not working as 100MBPS
2017-08-23 11:16:16 - last edited 2021-08-21 06:08:31
Hi dude, how did you connect your router to the Internet? Any other devices in before it?
  0  
  0  
#2
Options
Re:TL-R480T+ WAN port not working as 100MBPS
2017-08-24 12:56:04 - last edited 2021-08-21 06:08:31
No, there is no other devices in between router and internet line.
I have configured internet static IP's in the router itself and then I have connected my other devices(switch/APs) to the router.
  0  
  0  
#3
Options
Re:TL-R480T+ WAN port not working as 100MBPS
2017-08-25 17:19:04 - last edited 2021-08-21 06:08:31

shivaji.dhumal wrote

No, there is no other devices in between router and internet line.
I have configured internet static IP's in the router itself and then I have connected my other devices(switch/APs) to the router.

So you have a static public IP from your ISP? Is there any setting to limit the bandwidth, like bandwidth control set on the router? You can
reset the device. If I've got it right, the NAT throughput of R480T+ should be 96Mbps. No reason can't get 20Mbps bandwidth.
  0  
  0  
#4
Options
Re:TL-R480T+ WAN port not working as 100MBPS
2017-08-26 22:23:24 - last edited 2021-08-21 06:08:31
yes, I tried by resetting the load balance router but still same issue.
  0  
  0  
#5
Options
Re:TL-R480T+ WAN port not working as 100MBPS
2017-08-26 22:55:03 - last edited 2021-08-21 06:08:31
Could be marketing speak versus reality. In our country ISPs sell Internet access with "up to XX Mbit/s", but they actually don't deliver the full speed. I also saw offers with "XX Mbit/s full-duplex" meaning they just added the speed for downloads/uploads, so the real throughput in one direction is only 1/2 of "XX Mbit/s".

You might want to check if this is the case with your "20 Mbit/s plan".

Next issue could be the speed test. IMHO, the most reliable speed test is http://www.dslreports.com/speedtest You might try this one to compare the results.

Hope this helps!
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#6
Options
Re:TL-R480T+ WAN port not working as 100MBPS
2017-08-28 18:23:08 - last edited 2021-08-21 06:08:31
Hello Shivaji
I have the SAME problem.
50Mb speed but it does not work over 20.......
Did you fix it or didn't you?
Thanks
  0  
  0  
#7
Options
Re:TL-R480T+ WAN port not working as 100MBPS
2017-09-01 15:12:50 - last edited 2021-08-21 06:08:31

Roberto Ballabeni wrote

Hello Shivaji
I have the SAME problem.
50Mb speed but it does not work over 20.......
Did you fix it or didn't you?
Thanks

The NAT throughput of R480T+ could handle even 100Mbps, can you make sure the ISP give you totally 500Mbps?
  0  
  0  
#8
Options
Re:TL-R480T+ WAN port not working as 100MBPS
2017-09-02 15:18:22 - last edited 2021-08-21 06:08:31
Yup, I catch the issue.

Actually, it was an issue from my ISP(Internet Service Provider). His hardware port through which I got a connection is not supporting 100MBPS.

I have taken a new line of 50MBPS, and that works fine.

Ask your ISP, whether their hardware is compatible to provide 100mbps of bandwidth.

If not, it's better to change ISP.
  0  
  0  
#9
Options
Re:TL-R480T+ WAN port not working as 100MBPS
2017-09-04 01:47:33 - last edited 2021-08-21 06:08:31

shivaji.dhumal wrote


Actually, it was an issue from my ISP


As I said: the ISP did sell you a 20 Mbit/s plan and connected you to a 10BASE-T port (10 Mbit/s), which gives you 10 Mbit/s for upload and 10 Mbit/s for download simultaneously. Thus, your speed test did correctly show 19 Mbit/s (2x 9.45) for the link. It's a marketing trick.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#10
Options

Information

Helpful: 0

Views: 2657

Replies: 9

Related Articles