EAP 120: Windows 8 and 10 freeze after connection to the wifi (with EAP Controller)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP 120: Windows 8 and 10 freeze after connection to the wifi (with EAP Controller)
Model :
Hardware Version :
Firmware Version :
ISP :
Hi all.
i have a problem.
I have deployed 2 EAP 120 and i have updated the firmware to the (EU)_V1_160405 in order to use them with EAP controller.
I'm experiencing since then some problems of deconnection of the Ap and problem in adopt.
Recently, i was obliged to hard reset the AP.
And after that, when computer with windows 8 and 10 try to connect to the wifi, they freeze (sometimes immediately, or after a moment).
The computers under windows 7 are not involved.
Here is a brief detail about the architecture:
- Acces points firmware: (EU)_V1_160405
- EAP controller version: 2.4.7
- Presence of router: Yes (TP Link WR940 N) which is DHCP server
- Additional information: use of MAC filtering
Hop that you could help me to solve this problem....
It is a little urgent for me.
Thanks a lot
Hardware Version :
Firmware Version :
ISP :
Hi all.
i have a problem.
I have deployed 2 EAP 120 and i have updated the firmware to the (EU)_V1_160405 in order to use them with EAP controller.
I'm experiencing since then some problems of deconnection of the Ap and problem in adopt.
Recently, i was obliged to hard reset the AP.
And after that, when computer with windows 8 and 10 try to connect to the wifi, they freeze (sometimes immediately, or after a moment).
The computers under windows 7 are not involved.
Here is a brief detail about the architecture:
- Acces points firmware: (EU)_V1_160405
- EAP controller version: 2.4.7
- Presence of router: Yes (TP Link WR940 N) which is DHCP server
- Additional information: use of MAC filtering
Hop that you could help me to solve this problem....
It is a little urgent for me.
Thanks a lot