TP-LINK WBS210 OUTDOOR Access Point connection with router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-LINK WBS210 OUTDOOR Access Point connection with router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-LINK WBS210 OUTDOOR Access Point connection with router
TP-LINK WBS210 OUTDOOR Access Point connection with router
2017-10-27 15:20:48
Model :

Hardware Version :

Firmware Version :

ISP :

I need help i bought

TP-LINK WBS210 OUTDOOR 2.4GHZ 300MBPS WIRELESS BASE STATION

i have my router in 1st floor and i need to have wifi in 2nd floor too,
i think i must use tp-link as access point via etherenet,but i did everything wrong
please can you give me the steps to follow?
i messed up with the ip
i want to use the devise as access point with ethernet cable

internet access --> my modem 1st floor --> tp link access point (connected with ethernet cable)--> my laptop 2nd floor
  0      
  0      
#1
Options
1 Reply
Re:TP-LINK WBS210 OUTDOOR Access Point connection with router
2017-10-28 03:39:26
WBS210 is an outdoor base station mostly used for long-range links with sector or dish antennas. Are you using the WBS for its PPPoE feature in AP Router mode (b/c you have a modem connected to it)?

If this is the reason for choosing the WBS as indoor AP, take a look at the TL-ANT2410MO omnidirectional antenna, which might be better suited to supply client devices in an indoor scenario: http://www.tp-link.com.au/products/details/TL-ANT2410MO.html

Y
ou would have to configure it this way then ( AP Router mode, not AP mode):





Note that although the picture shows a CPE, it's the same mode/setup you would use with a WBS and external antenna.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options