TL-ER604W IKE/IPSec with default Windows 10 vpn client
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER604W IKE/IPSec with default Windows 10 vpn client
Model :
Hardware Version :
Firmware Version :
ISP :
Hello,
I was trying to configure client-to-lan. PPTP works perfect but is not safe. L2TP/IPSec would be ok, but despite many manuals I had problems to get it worked on default Windows 10 vpn client and then I found information that IKE/IPSec is the most secured so... I found many manuals shows how to configure IKE and how it works, how to configure additional vpn client but IKE, as I know is one of the Microsoft child. So I don't want additional software but default Windows 10 client says that there are problems with connection. Is somewhere any tutorial how to get it worked IKE/IPSec with most recent Windows 10 Home?
Hardware Version :
Firmware Version :
ISP :
Hello,
I was trying to configure client-to-lan. PPTP works perfect but is not safe. L2TP/IPSec would be ok, but despite many manuals I had problems to get it worked on default Windows 10 vpn client and then I found information that IKE/IPSec is the most secured so... I found many manuals shows how to configure IKE and how it works, how to configure additional vpn client but IKE, as I know is one of the Microsoft child. So I don't want additional software but default Windows 10 client says that there are problems with connection. Is somewhere any tutorial how to get it worked IKE/IPSec with most recent Windows 10 Home?
