NAT 1:1 and TL-ER6120
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
NAT 1:1 and TL-ER6120
Model :
Hardware Version :
Firmware Version :
ISP :
Hi, I am new to this.
I have a PLC (Programmable Logic Controler) and a computer that I want to reach through a NAT one-to-one.
It seem to work but I cannot ping anything on the LAN side and the computer on the LAN cannot access Internet
The WAN1 is static at 10.114.13.65 with a mask 255.255.255.0 and the gateway is 10.114.13.1
The LAN is 192.168.0.1 with a mask 255.255.255.0
The PLC is 192.168.0.10
The computer is 192.168.0.11
The gateway for both of the equipement is 192.168.0.1
The NAT is like this :
Original IP :
- 192.168.0.10
- 192.168.0.11
Translated IP :
- 10.114.13.70
- 10.114.13.71
Interface :
- WAN1
- WAN1
Description :
- PLC
- PC
From the Maintenance/Diagnostics menu of the TL-ER6120 I can ping the PLC and the PC on the LAN and I can ping web sites from the WAN1
From the network 10.114.13.xxx I can ping the router 10.114.13.65 but I cannot ping the PLC or the PC at 10.114.13.70 and 71.
Does someone can help me to be able to access internet with the PC and also, is ther a way that I can ping the LAN side from the outside ?
Thank-You
Hardware Version :
Firmware Version :
ISP :
Hi, I am new to this.
I have a PLC (Programmable Logic Controler) and a computer that I want to reach through a NAT one-to-one.
It seem to work but I cannot ping anything on the LAN side and the computer on the LAN cannot access Internet
The WAN1 is static at 10.114.13.65 with a mask 255.255.255.0 and the gateway is 10.114.13.1
The LAN is 192.168.0.1 with a mask 255.255.255.0
The PLC is 192.168.0.10
The computer is 192.168.0.11
The gateway for both of the equipement is 192.168.0.1
The NAT is like this :
Original IP :
- 192.168.0.10
- 192.168.0.11
Translated IP :
- 10.114.13.70
- 10.114.13.71
Interface :
- WAN1
- WAN1
Description :
- PLC
- PC
From the Maintenance/Diagnostics menu of the TL-ER6120 I can ping the PLC and the PC on the LAN and I can ping web sites from the WAN1
From the network 10.114.13.xxx I can ping the router 10.114.13.65 but I cannot ping the PLC or the PC at 10.114.13.70 and 71.
Does someone can help me to be able to access internet with the PC and also, is ther a way that I can ping the LAN side from the outside ?
Thank-You