T2600-28TS (TL-SG3424) Not initializing/Working
T2600-28TS (TL-SG3424) Not initializing/Working
Hi guys.
I recently bought this mentioned switch, and it have worked unmanaged for a little month, but now it doesnt.
i came home from work, to a home without internet, and went to my router to turn off/on since it have worked sometimes (the local distributor is not the best)
just to se the switch turned off in all the LEDs except the PWR LED.
I thought the switch just needed a new initialization, and ended up waiting two hours, and still no connections.
Then i turned the switch off/on, but still the same result; no initialization and no connections. (shown in picture below)
Next step was to disconnect everything except my laptop and connect to the GUI (wich i have never used before, since the switch worked as a unmanaged)
But i could not connect to the GUI, so okay, i will try this CLI im not the best with. and to my big suprise i cannot establish any connection.
So i cannot access the switch via GUI or CLI and therefore; cannot reset the switch. (and no reset button on case)
My conclusion: defect equipment?
Any other suggestions from you guys?
And sorry for the bad English :)
Regards.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@abedmafz If your using this switch as an unmanaged switch then try a reset
- Copy Link
- Report Inappropriate Content
Hello the problem appeared after a big power cut. No more kernel no more backup. Solution consider using the GPL code. In order to reinitialize the kernel but if you have another solution I am interested. Thank you Gerard
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 5012
Replies: 12
Voters 0
No one has voted for it yet.