WebUI on EAP225 not accessible after power outage - squashfs error

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WebUI on EAP225 not accessible after power outage - squashfs error

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WebUI on EAP225 not accessible after power outage - squashfs error
WebUI on EAP225 not accessible after power outage - squashfs error
2019-09-06 07:44:45
Model: EAP225  
Hardware Version: V3
Firmware Version:

After short power outage EAP225 working quite unstable, rebooting every 1.5-2 hours, moreover WebUI is not accessible any but ssh. Wifi still working, so clients can connect.

 

I have been able to loogin via ssh and check processes and log, there is no http active process and nothing listening on port 80 or 443 additionaly to that, dmesg  shows alot of error like "squashfs error: unable to read page, block ...".

 

So, how it could be fixed ? it it any chance to re-image ?

  0      
  0      
#1
Options
5 Reply
Re:WebUI on EAP225 not accessible after power outage - squashfs error
2019-09-08 05:20:15

Goosey-George wrote

After short power outage EAP225 working quite unstable, rebooting every 1.5-2 hours, moreover WebUI is not accessible any but ssh. Wifi still working, so clients can connect.

 

I have been able to loogin via ssh and check processes and log, there is no http active process and nothing listening on port 80 or 443 additionaly to that, dmesg  shows alot of error like "squashfs error: unable to read page, block ...".

 

So, how it could be fixed ? it it any chance to re-image ?

 

Please upload the page of the error in the SSH, so that we can know more information about this. 

 

If it is ok for you, you can reset the EAP to have a try. We are not sure if the hardware or software has something wrong. Sometimes when we reset the AP, some issues will be fixed automatically.

 

  0  
  0  
#2
Options
Re:WebUI on EAP225 not accessible after power outage - squashfs error
2019-09-09 07:01:52
unfortunately it's remote location, but will try to do a reset next time

BusyBox v1.01 (2018.06.28-06:58+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

$ dmesg
UASHFS error: Unable to read fragment cache entry [54e35c]
[ 1285.910000] SQUASHFS error: Unable to read page, block 54e35c, size 765c
[ 1285.920000] SQUASHFS error: Unable to read fragment cache entry [54e35c]
[ 1285.920000] SQUASHFS error: Unable to read page, block 54e35c, size 765c
[ 1285.930000] SQUASHFS error: Unable to read fragment cache entry [54e35c]
[ 1285.940000] SQUASHFS error: Unable to read page, block 54e35c, size 765c
[ 1285.950000] SQUASHFS error: Unable to read fragment cache entry [54e35c]
[ 1285.950000] SQUASHFS error: Unable to read page, block 54e35c, size 765c
[ 1285.960000] SQUASHFS error: Unable to read fragment cache entry [54e35c]
[ 1285.970000] SQUASHFS error: Unable to read page, block 54e35c, size 765c
[ 1285.970000] SQUASHFS error: Unable to read fragment cache entry [54e35c]
[ 1285.980000] SQUASHFS error: Unable to read page, block 54e35c, size 765c

$ cat /proc/partitions
major minor  #blocks  name
  31        0        128 mtdblock0
  31        1         64 mtdblock1
  31        2         64 mtdblock2
  31        3       1536 mtdblock3
  31        4      14336 mtdblock4
  31        5        192 mtdblock5
  31        6         64 mtdblock6

$ mount
/dev/mtdblock4 on / type squashfs (ro,relatime)
/proc on /proc type proc (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,mode=622)
none on /tmp type ramfs (rw,relatime)
none on /var type ramfs (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)

$ netstat -ln
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State     
tcp        0      0 0.0.0.0:51237           0.0.0.0:*               LISTEN     
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN     
udp        0      0 0.0.0.0:1040            0.0.0.0:*                          
udp        0      0 127.0.0.1:4000          0.0.0.0:*                          
raw        0      0 0.0.0.0:255             0.0.0.0:*               0          
Active UNIX domain sockets (only servers)
Proto RefCnt Flags       Type       State         I-Node Path

 

$ ps ax
  PID  Uid     VmSize Stat Command
    1 root        408 S   init 
    2 root            SW  [kthreadd]
    3 root            SW  [ksoftirqd/0]
    4 root            SW  [kworker/0:0]
    6 root            SW< [khelper]
    7 root            SW  [kworker/u:1]
   19 root            SW  [irq/10-ath79-gp]
   57 root            SW  [sync_supers]
   59 root            SW  [bdi-default]
   61 root            SW< [kblockd]
   91 root            SW  [kswapd0]
  141 root            SW  [fsnotify_mark]
  150 root            SW< [ath79-spi]
  161 root            SW  [mtdblock0]
  166 root            SW  [mtdblock1]
  171 root            SW  [mtdblock2]
  176 root            SW  [mtdblock3]
  181 root            SW  [mtdblock4]
  186 root            SW  [mtdblock5]
  191 root            SW  [mtdblock6]
  205 root            SW  [kworker/0:1]
  214 root        320 S   /sbin/hotplug2 --override --persistent --set-rules-file /etc/hotplug2.rules --set-coldplug-cmd /sbin/udevtrigger --max-children 1
  287 root       7316 S   /usr/bin/uclited
  289 root        416 S   /bin/sh /etc/rc.d/rc.eapcs
  291 root        368 S   /sbin/getty ttyS0 115200
  292 root        336 R   cat /usr/bin/eap-cs
  293 root       7316 S   /usr/bin/uclited
  294 root       7316 S   /usr/bin/uclited
  295 root       7316 S   /usr/bin/uclited
  296 root       7316 S   /usr/bin/uclited
  297 root       7316 S   /usr/bin/uclited
  298 root       7316 S   /usr/bin/uclited
  299 root       7316 S   /usr/bin/uclited
  346 root       4316 S   /usr/bin/uclited
  356 root        372 S   syslogd -C -l 7
  368 root        340 S   klogd
  371 root       7316 S   /usr/bin/uclited
  485 root       4316 S   /usr/bin/uclited
  486 root       4316 S   /usr/bin/uclited
  511 root       4160 S   /usr/bin/uclited
  528 root       7316 S   /usr/bin/uclited
  529 root       7316 S   /usr/bin/uclited
  536 root       7316 S   /usr/bin/uclited
  539 root       7316 S   /usr/bin/uclited
  540 root       7316 S   /usr/bin/uclited
  568 root       7316 S   /usr/bin/uclited
  585 root            SW  [kworker/u:2]
  597 root        364 S   /sbin/udhcpc -h EAP225-D8-0D-17-10-C6-E0 -i br0 -p /tmp/udhcpc.pid -s /etc/udhcpc.script
  598 root        212 S   /sbin/udhcpc -h EAP225-D8-0D-17-10-C6-E0 -i br0 -p /tmp/udhcpc.pid -s /etc/udhcpc.script
  610 root        356 S   /usr/local/sbin/dropbear -p 22 -r /tmp/dropbear_rsa_host_key -d /tmp/dropbear_dss_host_key -L
  917 root        592 S   hostapd /tmp/topology1.conf
1108 root        592 S   hostapd /tmp/topology2.conf
1260 root       7316 S   /usr/bin/uclited
1290 root       7316 S   /usr/bin/uclited
1291 root       7316 S   /usr/bin/uclited
1292 root       7316 S   /usr/bin/uclited
1309 root       7316 S   /usr/bin/uclited
1310 root       7316 S   /usr/bin/uclited
10792 root        620 R   /usr/local/sbin/dropbear -p 22 -r /tmp/dropbear_rsa_host_key -d /tmp/dropbear_dss_host_key -L
10865 guest       492 S   -sh
11444 guest       396 R   ps ax

 

  0  
  0  
#3
Options
Re:WebUI on EAP225 not accessible after power outage - squashfs error
2019-09-25 11:43:14

 

so, factory reset doesn't help, even became worse :) I could see a default SSID of AP but can't connect.

Also I have tryed with lan cable, nmap shows me that only ssh port is open but login via ssh doesn't work anymore.

 

Is it any possibility of tftp recovery or any other method ?

 

 

  0  
  0  
#4
Options
Re:WebUI on EAP225 not accessible after power outage - squashfs error
2019-09-26 09:30:33

 

Goosey-George wrote

 

Is it any possibility of tftp recovery or any other method ?

 

If the flash chip is defective, usually no recovery method will help. I suggest to RMA the EAP, as a business-class device it has lifetime warranty (lifetime being the active support time of the product).

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#5
Options
Re:WebUI on EAP225 not accessible after power outage - squashfs error
2019-09-27 00:31:15

Goosey-George wrote

 

so, factory reset doesn't help, even became worse :) I could see a default SSID of AP but can't connect.

Also I have tryed with lan cable, nmap shows me that only ssh port is open but login via ssh doesn't work anymore.

 

Is it any possibility of tftp recovery or any other method ?

 

 

 

We want to check if the flash of your devcie defective, and I have sent you a message about that. If possible, I think we can have a check together.

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1335

Replies: 5

Related Articles